1) energy absorption property
吸能性
1.
The results show that the stress-strain response and the energy absorption of the aluminum foams are affected remarkably by the addition of the alloying elements such as Si, Mg and Cu, and the yield strength as well as energy absorption property of .
实验结果表明,Si、Mg及Cu元素合金化处理能显著改变泡沫铝的应力-应变行为与吸能特征,使泡沫铝的屈服强度提高,吸能性大幅度上升。
2) energy absorption ability
吸能性能
1.
The compression deforming activity and energy absorption ability of aluminum foam with silicone rubber and rubber cylinder sandwich with silicone rubber were studied.
研究表明:在泡沫铝中充填硅橡胶后,泡沫铝的平台区比原来增高、增长,其吸能性能也得到提高;由于泡沫铝的充填,钢管的变形方式发生改变,由不对称屈曲转变为轴对称屈曲;充填硅橡胶的泡沫铝层合金属管具有比原来更高的屈曲褶皱载荷,且屈曲褶皱的产生滞后,其吸能性能也得到提高,硅橡胶充填对层合钢管的影响比对层合铝管的影响更明显。
2.
Compression deforming activity and energy absorption ability of aluminum foam with silicone rubber and aluminum foam with silicone rubber cylinder sandwich under pressing was studied.
在此基础上，研究了硅橡胶的充填对泡沫铝及泡沫铝层合管吸能性能的影响；面板厚度对泡沫铝层合梁抗弯性能的影响。
3) energy absorption
吸能性能
1.
The characteristics of cellular aluminum specimen under compression were investigated, and the effects of porosity and pore-diameter on energy absorption of cellular aluminum were revealed.
研究了胞状铝的压缩形变特征以及孔隙率、孔径对吸能性能的影响 ;提出了不同孔隙率和孔径的胞状铝吸能性能的综合判别方法 。
4) energy-absorption performance
吸能性能
1.
Experimental investigation on static compressive behavior and energy-absorption performance of closed cellular Al-Cu alloy;
泡沫铝铜合金静态压缩力学行为和吸能性能的实验研究
5) sound absorption
吸声性能
1.
To promote the sound absorption performance at different frequencies,gradual porous aluminium alloy was processed via pressure infiltration.
为了克服现有多孔铝合金的吸声性能在不同频率下存在较大波动的问题,采用渗流法制备了可控孔径的梯度孔径多孔铝合金,分析了孔径梯度、试样厚度对吸声性能的影响。
2.
Stand wave tube equipment is a special equipment for testing sound absorption performance of different material.
驻波管测试仪是用于测量材料吸声性能的专用仪器,利用该仪器对金属橡胶吸声性能进行测量,使测量结果满足金属橡胶吸声性能实验研究的精度要求,且便于材料实验结果的误差分析,需对驻波管测试仪进行检测和调试。
3.
The results indicated that the type,amount and hollow structure of filler had different effects on the sound absorption of coatings.
研究了聚硅氧烷改性聚氨酯涂层的吸声性能,研究结果表明,填料种类、结构、含量以及空腔结构会对涂层体系的吸声性能产生不同程度的影响。
6) absorbing property
吸波性能
1.
The impact of magnetizing treatment on the absorbing property of the absorbing coat;
磁化处理对吸波涂层吸波性能的影响
2.
The influence of the fiber absorber's conductivity,the fiber content and the thickness of foam screed on the foam material's absorbing property was discussed by studying the absorbing property of the polyurethane foam filling with a kind of conductive short fibers.
通过对一种含导电短纤维的聚氨酯(PUR)泡沫塑料吸波性能的研究,探讨了纤维吸收剂的电导率、含量和泡沫塑料试样厚度对PUR泡沫塑料吸波性能的影响。
3.
By analysing the absorbing properties of polyurethane foam plastic filling with carbon fiber, carbon fiber/fiberⅠ, carbon fiber/ fiber Ⅱ, the influence of fiber type, content and screed thickness on absorbing property of the plastic sample plate were discussed.
通过对碳纤维、碳纤维/纤维Ⅰ和碳纤维/纤维Ⅱ分别填充的硬质聚氨酯泡沫塑料的吸波性能的研究,探讨了纤维类型、纤维含量、样品厚度的相关变化对塑料样板吸波性能的影响。
补充资料：连续性与非连续性(见间断性与不间断性)
连续性与非连续性(见间断性与不间断性)
continuity and discontinuity
11an父ux泊g四f“山。麻以角g、.连续性与非连续性(c。nt，n琳t:nuity一)_见间断性与不间断性。and diseo红ti-
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条