1) energy Absorption characteristic
吸能特性
1.
Experimental investigation on the energy Absorption characteristic of braided composite circular tubes subjected to quasi-static axial compression;
编织复合材料圆管准静态轴向压缩吸能特性的试验研究
2.
Based upon the test results,the energy absorption characteristic of the plastic deformation energy absorber with aluminum foam filled in a thin-wall metal tube was analyzed,and compared with those of aluminum foam and the energy absorber with a thin-wall metal tube\'s plastic deformation.
通过试验方法研究了泡沫铝填充薄壁金属管塑性变形缓冲器在准静态作用下的吸能特性。
2) energy absorption
吸能特性
1.
The system, taking on capability of data testing and processing, is used to study the special carrying capacity and energy absorption characteristics of foamed aluminum, and the dynamic stress strain response characteristics and sensitivity analysis under repeating shock are also performed.
基于马歇特落锤实验原理,设计与开发出具备测试与数据采集分析功能的高过载冲击试验系统,并运用该设备研究了反复冲击条件下泡沫铝芯体的耐冲击能力和应力-应变响应特性、吸能特性与反复冲击次数的敏感性。
3) absorption behavior
吸收性能;吸收特性
5) energy absorption ability
吸能性能
1.
The compression deforming activity and energy absorption ability of aluminum foam with silicone rubber and rubber cylinder sandwich with silicone rubber were studied.
研究表明:在泡沫铝中充填硅橡胶后,泡沫铝的平台区比原来增高、增长,其吸能性能也得到提高;由于泡沫铝的充填,钢管的变形方式发生改变,由不对称屈曲转变为轴对称屈曲;充填硅橡胶的泡沫铝层合金属管具有比原来更高的屈曲褶皱载荷,且屈曲褶皱的产生滞后,其吸能性能也得到提高,硅橡胶充填对层合钢管的影响比对层合铝管的影响更明显。
2.
Compression deforming activity and energy absorption ability of aluminum foam with silicone rubber and aluminum foam with silicone rubber cylinder sandwich under pressing was studied.
在此基础上，研究了硅橡胶的充填对泡沫铝及泡沫铝层合管吸能性能的影响；面板厚度对泡沫铝层合梁抗弯性能的影响。
6) energy absorption
吸能性能
1.
The characteristics of cellular aluminum specimen under compression were investigated, and the effects of porosity and pore-diameter on energy absorption of cellular aluminum were revealed.
研究了胞状铝的压缩形变特征以及孔隙率、孔径对吸能性能的影响 ;提出了不同孔隙率和孔径的胞状铝吸能性能的综合判别方法 。
补充资料：能谱统计特性
分子式：
CAS号：
性质：由放射性衰变和射线探测这两类统计过程引起的能谱数据服从统计变化的性质。是能谱分析统计误差的来源。
CAS号：
性质：由放射性衰变和射线探测这两类统计过程引起的能谱数据服从统计变化的性质。是能谱分析统计误差的来源。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条