1) Response surface methodology
响应面分析法
1.
Study on extraction of Nostoc commune vauch polysaccharides by response surface methodology;
响应面分析法优化地木耳多糖提取工艺的研究
2.
Enzymatic Hydrolysis Technology of Grass Carp Protein Based on Response Surface Methodology;
基于响应面分析法的草鱼蛋白酶解工艺
3.
Optimization of Laccase production by White-rot Fungus Y10 in liquid cultures using Response Surface Methodology
响应面分析法优化白腐菌Y10产漆酶培养基研究
2) Response surface analysis
响应面分析法
1.
The study on extraction technique of chlorogenic acid from olive leaves optimized by response surface analysis;
响应面分析法优化杜仲叶中绿原酸提取工艺的研究
2.
Optimization of the beef essence by Maillard reaction via-response surface analysis;
响应面分析法优化牛肉香精美拉德反应的研究
3.
Plackett-burman and response surface analysis methods were applied to optimize conditions of phenazine-1-carboxylic acid fermentation.
将Plackett-Burman设计法和响应面分析法相结合,对假单胞菌M18合成吩嗪-1-羧酸的发酵条件进行了优化,结果表明,初始葡萄糖浓度和种龄是影响吩嗪-1-羧酸发酵效价的主要因素。
3) response surface methodology(RSM)
响应面分析法
1.
Fermentation medium of Brevibacterium epidermidis ZJB-07021 producing R-amidase was optimized by using response surface methodology(RSM).
采用响应面分析法(RSM)对R-酰胺酶产生菌Brevibacterium epidermidis ZJB-07021的发酵培养基进行了优化。
2.
The response surface methodology(RSM) is used to optimize the conditions for the maximum conversion to biodiesel and to understand the significance and interaction of the factors affecting the biodiesel production.
应用响应面分析法采用四因素三水平三中心点的中心组合设计实验,考察了醇油摩尔比、催化剂用量、反应温度、反应时间等主要影响因素,以及因素间的交互作用与生物柴油得率之间的影响关系,通过优化分析得到的最佳实验条件为:醇油比为7。
4) response surface method
响应面分析法
1.
The ranges of reaction temperature, reaction time and dialysis time were confirmed through single factor experiment, then a response surface method was conducted to get the following optimal parameters: reaction time 16.
通过单因素试验确定了反应温度、反应时间和透析时间三个试验因素的取值范围,并用响应面分析法确定了最佳工艺参数:反应时间16。
2.
Based on the single factor experiment,the response surface method with three factors at three levels is adopted according to the principle of central compages design.
利用响应面法对超声提取八角茴香油的工艺进行优化,在单因素实验的基础上,根据中心组合设计原理,采用三因素三水平的响应面分析法,依据回归分析确定最优提取工艺条件。
5) RSM
响应面分析法
1.
On basis of single-factor experiments,the optimum conditions for the extraction of theasaponins were obtained through Box-Benhnken Centeral composite designs and Response Surface Methodology(RSM).
对茶皂素的提取条件进行了分析研究,在单因素实验的基础上,利用响应面分析法,确定茶皂素提取的最佳工艺条件,即提取温度53℃,乙醇浓度45%,时间95 min,提取液与物料比10。
2.
Methods:Response surface method(RSM) was applied to a fractional design.
方法:以白苏总黄酮提取率为指标,采用响应面分析法优化超声提取工艺条件,考察乙醇浓度、固液比、提取次数等三因素对白苏总黄酮提取率的影响。
3.
The optimum process parameters of the Parabramis pekinensis enzymatic hydrolysis were determined with Box-Behnken response surface metnodology(RSM).
通过风味蛋白酶与其它蛋白酶复配筛选组合,综合考察影响酶解反应的4个因素:温度、时间、pH和酶添加量,以水解度(DH)为响应值,采用Box-Benhnken响应面分析法确定最佳反应条件。
6) response surface methodology(RSM)
响应曲面分析法
1.
) Nees(30% andrographolide) was used as experimental material,and the model of a second order quadratic equation for supercritical carbon dioxide extracting and crystallizing andrographolide was built by response surface methodology(RSM).
以穿心莲内酯含量为30%的穿心莲浸膏为试验原料,采用响应曲面分析法(R esponse SurfaceM ethodo logy,RSM)建立了超临界CO2萃取结晶穿心莲内酯结晶率的二次多项数学模型,验证了数学模型的有效性,并探讨了萃取结晶压力、温度、时间对结晶率的作用规律。
补充资料：频率响应法
分子式：
CAS号：
性质：一种建立系统非参数模型的方法。即给系统施加一系列不同频率的正弦信号，观测系统对这些正弦信号的不同输出响应，以求取系统数学模型的待定参数。有了数学模型以后，即可进行分析系统动态特性等等。
CAS号：
性质：一种建立系统非参数模型的方法。即给系统施加一系列不同频率的正弦信号，观测系统对这些正弦信号的不同输出响应，以求取系统数学模型的待定参数。有了数学模型以后，即可进行分析系统动态特性等等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条