1) alloying element
合金元素
1.
Research on organization change and alloying element variation of 12Cr1MoV Steel during long time operation;
12Cr1MoV钢长期运行过程中组织与合金元素的变化研究
2.
Effect of alloying elements on properties and microstructure of Sn-Bi-Sb-Ag-Cu-Re lead-free solder;
合金元素对Sn-Bi-Sb-Ag-Cu-Re系无铅钎料性能和组织的影响
3.
The Present Research Status and Role of Alloying Elements in Die-casting Alloy;
合金元素在压铸合金中的作用及研究现状
2) alloy element
合金元素
1.
Effect of alloy elements on properties of iron-base hardfacing alloy;
合金元素对铁基耐磨堆焊合金性能的影响
2.
Influences of alloy elements on mechanical properties of low alloy quenched and tempered steel;
合金元素对低合金调质钢力学性能的影响
3.
Influence of Alloy Elements on Properties of Silicon Steel;
合金元素对硅钢性能的影响
3) alloying elements
合金元素
1.
Research advances of adding alloying elements in the bond of metal matrix diamond tools;
金属基金刚石工具结合剂中添加合金元素的研究进展
2.
Influence of alloying elements on recrystallization kinetics of hot deformed austenite;
合金元素对热变形奥氏体再结晶的影响
3.
Quantitative Analysis on Effect of Alloying Elements on Ms Temperature of Maraging Stainless Steel;
合金元素对马氏体时效不锈钢Ms温度影响的定量分析
4) alloy elements
合金元素
1.
Effect of alloy elements on physical metallurgy and mechanical properties of Laves NbCr_2-based compounds;
合金元素对Laves相NbCr_2基化合物物理冶金及力学性能的影响
2.
In order to achieve the desirable microstructure and mechanical properties,the alloy elements such as Mn,Nb,V,Ti and Mo,and thermo-mechanical control process in trial-production of pipeline steel are adopted.
通过在管线钢中添加Mn、Nb、V、Ti和Mo等合金元素与采用控轧控冷工艺可获得良好的微观组织和综合力学性能。
3.
An approach is made into the alloy elements impacting wire of hi-carbon content.
介绍了梳理用针布齿条专用钢丝的性能要求,分析了其材质和工艺性能与针布齿条性能之间的关系;总结了国内外针布齿条专用钢丝材质成分的发展历史;阐述了合金元素在针布齿条专用高碳钢丝中的作用,对针布齿条专用钢丝生产的发展趋势提出了可行性建议。
5) microalloying element
微合金元素
1.
The results showed that the softening is restricted by the carbonitrides of microalloying elements Nb,V and Ti in the HSLA steel and,after 6-pass reduction,the austenite grain size is down to 8 μm through grain refining,i.
研究表明,对铌钒钛高强钢,微合金元素铌、钒、钛的碳氮化物能有效抑制奥氏体的高温软化行为,经过6道次变形的奥氏体晶粒细化到8μm左右,其控轧工艺为未再结晶区的控制轧制。
6) alloying elements
合金化元素
1.
The effects of alloying elements and heat treatments on the microstructure and mechanical properties of refractory metal silicide-based alloys have been reviewed in this paper.
在MoSi2中加入W,Nb和Ge等合金化元素后分别形成(Mo,W)Si2,(Mo,Nb)Si2或Mo(Si,Ge)2等硅化物,但在钼硅化物基合金中添加B后生成α-Mo,Mo3Si和T2相(MoSiB2),并且T2相所占的体积百分比与B的含量成正比。
2.
And discuss the effect of alloying elements such as Ti,Cr,Hf and Mo on the Laves phase,metastable phase Nb_3Si and (?)-Nb_5Si_3 was studied.
综述了近年来国内外在合金化改善Nb基高温合金组织形貌、提高力学性能方面所取得的进展,分析了Ti,Cr,Hf和Mo等合金化元素对合金中Laves相,亚稳相Nb_3Si和γ-Nb_5Si_3的影响,总结了合金元素对材料力学性能的影响规律。
补充资料：合金元素
分子式：
分子量：
CAS号：
性质：组成合金的化学元素。多数是金属元素，如铜、锡、铅、铝、锰、铬、钼、镍及稀有金属等。少数是非金属元素，如碳、硅、磷等。
分子量：
CAS号：
性质：组成合金的化学元素。多数是金属元素，如铜、锡、铅、铝、锰、铬、钼、镍及稀有金属等。少数是非金属元素，如碳、硅、磷等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条