1) power free oil-water separator
无动力油水分离器
1.
In order to make the oily water to the quality of return to oil field,the power free oil-water separator, which had function of coagulation,sedimentation and filtration,was used,the coagulant added amount to be optimized based on the test results.
为使江苏油田含油污水能够达到回注水的水质要求,利用集混凝、沉降、过滤于一体的无动力油水分离器来处理含油污水;根据实验结果调整了混凝剂的投加量,结果表明:处理效果明显得到提高,水质能够满足回注水质的要求。
2) automatic oily water separator
自动油水分离器
3) Hydrocyclone oil-water separator
水力旋流油水分离器
4) oil-water separator
油水分离器
1.
Numerical Simulations on the Helical Pipe Oil-Water Separators for De-Oiling;
脱油型螺旋管油水分离器的数值模拟
2.
The principles and structure characteristics of the common oil-water separator are introduced.
分析了脱脂液中油分的来源及存在状态,介绍了常用油水分离器的原理和结构特点。
3.
Researching on the process mechanism of mass-transfer of coalescence-plate oil-water separator, a (novel) high efficiency composite coalescence-plate that can enhance the separating process was developed.
通过对聚结板式油水分离器传质过程机理的研究,开发出能够强化油水分离过程的新型高效复合聚结板。
5) oil water separator
油水分离器
1.
The revamp of internal construction of oil water separator in atmospheric-vacuum distillation unit from first generation to the third generation is detailed.
主要介绍了常减压蒸馏装置油水分离器内部结构由第一代改进到第三代的详细情况。
2.
A vertical oil water separator,filled with a newly surface nature changed fiber,was designed to treat oily wastewater.
针对含油污水设计制作了一套内置新型改性纤维填料的立式油水分离器;考察了该油水分离器进口流速和污水含油浓度对处理后出水油含量和除油效率的影响,并分析了污水含油浓度对油滴脱除粒径的影响。
3.
Gas carrying with wash oil after the benzol washer,disease of wash oil,leaking oil of oil water separator etc.
塔后煤气夹带洗油、洗油变质、油水分离器跑油等是影响循环洗油消耗的主要原因。
6) oily water separator
油水分离器
1.
The character of marine oily is analyzed;the present situation and the problems in the use of oily water separators is discussed;and a method of pre dealing with marine oily bilge by the hydrocyclone is proposed.
分析了船舶舱底含油污水的特性 ,讨论了船舶油水分离器的现状及使用中存在的问题 ,提出了使用旋流器对船舶舱底含油污水进行预处理 ,以改善进入船舶油水分离器的水质及减轻管理人员负
补充资料：去油水
分子式：
CAS号：
性质：由表面活性剂、有机溶剂和助剂复配制得。无色透明液体。除油污力强。对工件无腐蚀作用，效果优良。用于塑料机壳外表清洁工序，可去除ABS或改性聚苯乙烯塑料机壳的油污和脱模剂残渍。
CAS号：
性质：由表面活性剂、有机溶剂和助剂复配制得。无色透明液体。除油污力强。对工件无腐蚀作用，效果优良。用于塑料机壳外表清洁工序，可去除ABS或改性聚苯乙烯塑料机壳的油污和脱模剂残渍。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条