1) well testing
试油
1.
Research of comprehensive multiparameter weighted value discrimination method on liquidity of well testing formation;
试油层产液性质的多参数综合判别方法研究
2.
Innovative development of specially-designed tubing with high strength for well testing services;
试油作业用高强度特种油管的创新研制
3.
Development and application of measurement system for measuring loads on downhole tubular string during well testing;
试油井下管柱载荷测试器的研制及应用
2) oil production test
试油
1.
In the paper, 6 kinds of the new successful techniques are recommended at locale application about the oil production test, and the developing trend of the oil production test is prospected.
推荐了 6种现场应用比较成功的试油新技术 ,并对试油测试技术的发展趋势进行了展望。
2.
In 2004, Dagang oilfield has completed 6 wells of drilling, oil production testing and starting-up.
2004年,大港油田完成6口水平井的钻井、试油、投产任务。
3) oil test
试油
1.
When a well having multi-perforated layers or reexamine being conducted for old well, using plug to seal has features of being simple, shortening working cycle and reducing damage to formation comparing to cement of oil testing upward.
当一口井有多个射开层或对老井复试,仅对某一层段进行试油时,采用桥塞封堵比用注水泥塞封堵上返试油具有方法简单、使用方便、缩短作业周期、减少对油层伤害等特点。
2.
Using testing string to conduct measure of acidding (acidding and fracture) or fracture directly and a single system tech of oil test with flow back in time and measure is introduced.
介绍了利用试油管柱直接进行酸化(酸压)或压裂等措施,并能即时排液的试油与措施一体化工艺技术,总结分析了现场应用效果,指出了其工艺技术的优越性,提出了推广应用建议。
3.
This paper mainly introduces the new matching techniques of oil test and oil production in Φ89mm casing well.
重点介绍了江苏油田在89mm侧钻小套管井中进行试油、采油的配套工艺技术。
4) production test
试油
1.
In order to appreciate oil layer, production test means for low-productivity zone on different well condition is suggested clearly, several points for oil testing and its evaluation are proposed to supply reference for selecting proper .
海拉尔探区多为低孔隙度、低渗透储层,大部分井试油自然产能很低,地层测试仅回收到少量的油和水,不容易认清地层的真实产能。
2.
It is precondition of preparing reasonable production testing scheme to precisely predict the natural productivity in production testing interval.
准确预测试油层段的自然产能,是制定科学合理的试油方案的重要前提。
3.
In the course of production test, owing to a limited condition, at present the key methods which is swabbing, bailing, gas lift, gasifying water and formation test etc.
在试油阶段由于受条件的限制,目前采用的主要方法有抽汲、提捞、气举、气化水、地层测试等,对求准油层的产量并进行连续产能测试有较大的困难和局限性。
5) oil testing
试油
1.
Integrating tech of fracture with back flow to acquire productivity by hydraulic pump greatly increases oil testing efficiency,shortens testing cycle,decreases damage to formation.
吉林油田的地质条件决定了90%以上的试油层要进行压裂改造。
2.
Because there are many natural fractures in Fulin Sag and the fracture liquids seriously lose, the fracturing effect is not ideal by using the fracturing and oil testing technology.
富林洼陷前期的压裂试油工艺,由于天然裂缝较发育,压裂液滤失大,压裂效果不理想。
6) well test
试油
1.
This paper introduces the well test technique successfully used in a superdeep well with superhigh pressure and superhigh temperature, and provides some experience for testing this kind of well.
从试油井筒准备和试油工艺技术方面入手,介绍了超深超高压高温气井的试油工艺技术,为该类井的试油完井工作积累了可供借鉴的经验。
2.
Replacing wellhead without any control measures is the most dangerous operation in well testing.
无控制的换装井口作业是试油期间最大的安全隐患。
3.
During well testing in thermal recovering viscous oil wells in shallow layers,in order to deal with the difficulties,such as their geographical positions are scattered; depths of the layers,oil viscosity and physical properties of reservoir are very different,thorough study on reservoir geology and test technique is carried out.
在浅层稠油热采试油过程中,针对热采试油井地理位置分散、油层深度跨度大、原油粘度差异大、储层物性差别大等难点,深入油藏地质、工艺技术研究。
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条