1) the liquid desiccant with cooling equipment
带冷却液体除湿
2) liquid desiccant cooling system
液体除湿冷却空调系统
1.
In this paper,the thermodynamic analysis of liquid desiccant cooling systemhave been carried out, on this basis established the heat and mass transfer modelof main component.
对液体除湿冷却空调系统进行热力学分析,构建了系统各主要设备的传热传质模型,其中除湿器采用内冷型交叉流板式除湿器,再生器采用绝热再生塔,蒸发冷却器采用板式间接蒸发冷却器。
3) cooling dehumidification
冷却除湿
1.
A project of using solar-powered liquid desiccant to remove fresh air moisture load in cooling ceiling air-conditioning system is Puts forward,and it is compared with cooling dehumidification project.
提出了利用太阳能液体除湿处理冷却顶板空调系统新风湿负荷的方案,并将其与常规的冷却除湿方案进行了比较。
2.
Analyses a hybrid dehumidification process air conditioning system of desiccant wheel combined with cooling dehumidification.
介绍一个转轮除湿与冷却除湿相结合的复合式除湿工艺空调系统。
3.
The hybrid dehumidification air-conditioning system with a Cromer cycle desiccant wheel can organically combine rotary dehumidification with cooling dehumidification,where the desiccant wheel just transfers water vapor,and the cooling coil does all the dehumidification work.
Cromer循环转轮除湿复合空调系统将转轮除湿与表冷器冷却除湿有机地结合起来,转轮除湿实现系统内部的水分转移,表冷器的冷却除湿把全部湿负荷排到外部环境。
4) desiccant cooling
除湿冷却
1.
The study history and actualities of solar liquid desiccant cooling systems are introduced systematically.
从热力学角度找出溶液除湿冷却系统理论再生效率和理论性能系数的表达式。
5) Liquid cooling
液体冷却
1.
In order to realize miniaturization of the microwave plasma thruster(MPT),the solid source of the miniaturized MPT was developed by means of the integrated design technology of solid apparatus,attenuator and detector as well as the liquid cooling technology.
为了实现微波等离子推力器的小型化,利用固态器件、衰减器和检波器一体化设计技术及液体冷却技术,研制出小型化的微波等离子推力器固态源,其输出和反射微波功率可由固态源输入电压和检波器的输出电压进行控制与检测,固态源的质量与体积分别是磁控管微波源的15%和6%。
2.
In this paper,micro-structure liquid cooling analysis theory and experimental analysis were adopted to research the thermal design of MEMS with high thermal density.
文中从微小结构液体冷却热交换设计理论分析和试验着手,研究高热密度情况下的MEMS散热设计。
3.
A liquid cooling system was researched,which was 14.
4 mm3体积内,热密度为150W/cm2的电子设备液体冷却系统进行了研究。
6) internally cooled liquid desiccant dehumidifier
内冷型液体除湿器
1.
An internally cooled liquid desiccant dehumidifier was proposed and a steady state mathematical model describ- ing the heat and mass transfer of the dehumidification process was developed.
提出了一种内冷型液体除湿器,并对该除湿器的除湿过程建立了热质交换的稳态数学模型。
补充资料：液体功率
分子式：
CAS号：
性质：又称有效功率或液体功率。单位时间内泵输送出去的液体从泵中获得的有效能量。Pu=ρQgH，式中，Pu为输出功率，W；ρ为液体密度，kg/m3；Q为体积流量，m3/s；H为扬程，m；g为重力加速度，m/s2。
CAS号：
性质：又称有效功率或液体功率。单位时间内泵输送出去的液体从泵中获得的有效能量。Pu=ρQgH，式中，Pu为输出功率，W；ρ为液体密度，kg/m3；Q为体积流量，m3/s；H为扬程，m；g为重力加速度，m/s2。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条