1) ceramic coating
陶瓷涂层
1.
Present status on the research of ceramic coatings on magnesium alloys;
镁合金陶瓷涂层研究现状
2.
Study on preparation and wear resistance of nano- Al_2O_3 ceramic coatings on magnesium alloy;
镁合金表面纳米Al_2O_3陶瓷涂层的制备及耐磨性研究
3.
Preparation and corrosion resistance of electrophoretically-deposited Al_2O_3 ceramic coating;
电泳沉积氧化铝陶瓷涂层的制备及耐腐蚀性能
2) ceramic coatings
陶瓷涂层
1.
Study on SHS reactive flame sprayed multiphase ceramic coatings;
自蔓延反应火焰喷涂复相陶瓷涂层研究
2.
Formation mechanism for Al_2O_3 based ceramic coatings on aluminum alloy substrates;
铝合金基体上Al_2O_3基陶瓷涂层形成机理
3.
Study on ceramic coatings by flexible-cord spraying;
软线喷涂陶瓷涂层的研究
3) ceramic coat
陶瓷涂层
1.
The development of the ceramic coat plug valve core which substrate uses 45 steel is introduced.
该陶瓷涂层的组织细小,晶粒生长较完善,具有结合强度高、表面形态好、残余应力低的特点。
2.
From the mechanism of the ceramic coat of plasma spray,analyzing and measuring the metallic phase of the coating,coating thickness and uniform,density,porosity,bond strength,degree of hardness,agreeability and degree of roughness,at the same time,it gives good reference on repairing invalidation die.
根据等离子喷涂陶瓷涂层机理,对涂层的金相组织、厚度、密度、孔隙度以及涂层的结合强度、硬度、耐磨性和涂层表面粗糙度等性能进行测定和分析,阐述模具表面等离子喷涂陶瓷涂层性能的检测与分析技术,为模具修复提供技术保证。
4) ZrC ceramic coating
ZrC陶瓷涂层
1.
Study on the intensity process and the performance of the ZrC ceramic coating with electrical discharge in the liquid;
液中脉冲放电沉积ZrC陶瓷涂层的强化工艺及涂层性能的研究
5) Cr_2O_3 ceramic coatings
Cr_2O_3陶瓷涂层
6) Al2O3 ceramic coatings
Al2O3陶瓷涂层
1.
According to the fact that Al2O3 ceramic coatings have low adhesion strength and high porosity, two kinds of Al2O3 gradient ceramic coatings using NiAl intermetallic compound and Cu powders as transitive materials respectively were prepared by plasma spraying, and the microstructure of gradient coatings was observed, and the adhesion strength and porosity of the coatings were tested and analyzed.
针对Al2O3陶瓷涂层结合强度低、孔隙率高的实际,选择NiAl金属间化合物和金属铜粉作为过渡材料,利用等离子喷涂制备Al2O3梯度陶瓷涂层,并对梯度涂层进行组织形貌观察,测试结合强度和孔隙率。
补充资料:陶瓷涂层
分子式:
CAS号:
性质:用金属氧化物、硼化物、氮化物、硅化物及碳化物等陶瓷材料涂覆到金属材料表面构成的表面保护涂层。特点是耐高温、耐高温氧化和高温腐蚀及耐磨损和磨损腐蚀,主要用于高温腐蚀环境的金属构件保护,例如作为飞机和火箭发动机部件的防护层。涂覆方法一般采用火焰喷涂或等离子喷涂。
CAS号:
性质:用金属氧化物、硼化物、氮化物、硅化物及碳化物等陶瓷材料涂覆到金属材料表面构成的表面保护涂层。特点是耐高温、耐高温氧化和高温腐蚀及耐磨损和磨损腐蚀,主要用于高温腐蚀环境的金属构件保护,例如作为飞机和火箭发动机部件的防护层。涂覆方法一般采用火焰喷涂或等离子喷涂。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条