1) structural adhesive
结构胶
1.
Study on properties of epoxy resin structural adhesive modified by nanosize silicate;
纳米SiO_2改性环氧树脂结构胶的性能研究
2.
Study on high performance building structural adhesive modified by nano material;
纳米材料改性高性能建筑结构胶的研究
3.
Study on one part epoxy resin structural adhesive with high shear strength and high peeling strength;
高剪切高剥离强度单组分环氧树脂结构胶的研制
2) structure adhesive
结构胶
1.
Formed by copolymerization system of polyester typed performed polymer of polyurethane,epoxy resin and liquid nylon,a kind of flexible structure adhesive which has excellent bonding strength for whole core conveyer belt was prepared.
以聚酯型聚氨酯预聚体、环氧树脂和液体尼龙作为三元共聚体系,可制备一种对整芯输送带具有很好粘接强度的柔性结构胶,大大降低了生产成本和工人的劳动强度。
2.
According to the several solutions discussed and many gluing experiments done, the process in which structure adhesive replaces spot welding was determined.
采用点焊工艺生产拖拉机机罩,点焊压痕影响了外观质量,通过对几种方案的探讨和大量的胶粘试验,确定了一种用结构胶粘结代替点焊的工艺,该工艺使制件的外观质量得以大幅度提高,而生产成本则明显降低。
3) adhesive
[英][əd'hi:sɪv] [美][əd'hisɪv]
结构胶
1.
Butyronitrile rubber-40 toughened epoxy construction adhesive cured at room temperature;
丁腈-40增韧室温固化环氧结构胶
2.
The effect of these facters on bonding strength had been tested to obtain the best curing technology parameters of the adhesive with low viscosity for building to the desirable bonding quality,meeting with the project problems.
对影响建筑结构胶粘接强度的各工艺参数进行了试验研究,确定了低粘度结构胶最佳固化工艺参数,并结合工程施工提出相应解决措施。
3.
Through analyzing and comparing for some repairing methods it is bett er to select multi-metal adhesive, using hot assembly sleeve with interim fitt ing and binding method with injecting adhesive.
经对几种修复方法进行比较及强度校验分析 ,选用镁特铁结构胶 ,采用过渡配合热装轴套、注胶粘接的方法修复了轴颈。
5) structural film adhesive
结构胶膜
1.
Study on a bismaleimide modified epoxy structural film adhesive for heat-stability at 200℃;
耐热200℃双马改性环氧结构胶膜的研究
2.
Study on J-125 structural film adhesive for aluminium alloy plates bonding;
J-125铝合金复合层板结构胶膜的研制
3.
It is a high toughness and high strength modified bismaleimide structural film adhesive with bismaleimide resin serving as main part material,epoxy as modifier and polyarylsulphone as toughening agent.
J-188胶膜是以双马来酰亚胺树脂为主体树脂,以环氧树脂为改性剂,以耐热性好的热塑性工程塑料为增韧剂的高韧性高强度的耐高温结构胶膜。
6) gel structure
凝胶结构
1.
The effect of water content on the gelation behavior and gel structure was analyzed.
主要通过测量动态流变学参数(动态模量G′_j和G″_(jj)、损耗角正切tanδ、复数粘度η~*)来表征PAN溶液的凝胶化行为,分析了含水量对溶液凝胶化行为和凝胶结构的影响。
补充资料：次结构胶
分子式：
CAS号：
性质：又称次结构胶。其物理机械性能介于结构胶与非结构胶之间。视实际使用条件可用于一些受力部位，但应谨慎。所用胶种如酚醛、脲醛、聚氨酯、不饱和聚酯、有机硅等。从强度性能分类时，往往将1级胶黏剂定义为结构胶黏剂；2级胶黏剂定义为准结构胶黏剂；3级胶黏剂为非结构胶黏剂。
CAS号：
性质：又称次结构胶。其物理机械性能介于结构胶与非结构胶之间。视实际使用条件可用于一些受力部位，但应谨慎。所用胶种如酚醛、脲醛、聚氨酯、不饱和聚酯、有机硅等。从强度性能分类时，往往将1级胶黏剂定义为结构胶黏剂；2级胶黏剂定义为准结构胶黏剂；3级胶黏剂为非结构胶黏剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条