1.
Improvement Practice of Reducing Surface Longitudinal Crack of Wide and Thick Slab
减少宽厚板坯表面纵裂纹的改进实践
2.
The Technology Characteristic and Achievement of Domestic Wide & Sick Slab Casting Machine
国产宽厚板坯连铸机的技术特点及工艺实践
3.
Study on Simulation of Level Fluctuation in Wide and Thick Slab Continuous Casting Mould with Argon Blowing
吹氩宽厚板坯连铸结晶器内液面波动行为的水模型研究
4.
Water Modeling Study on Optimization of Fluid Control Devices in a Wide and Thick Slab Continuous Casting Tundish
宽厚板坯连铸中间包内控流结构优化水模实验研究
5.
Study of Identifying and Controlling the Plate Position on Wide and Thick Plate Mills;
宽厚板轧机钢坯位置识别与控制的研究
6.
Study on Solidified Shell Thickness Measurement and the Solidified Shell Shape of Slab
连铸板坯坯壳厚度测定及凝固壳形貌模拟研究
7.
Slab: rectangular in cross-section, with rounded corners and more than 5cm in thickness.
大板坯--横断面为矩形，圆角，厚度在5cm上。
8.
Design and performance of thick slab CCM
鞍钢厚板坯连铸机的设计及使用效果
9.
Analysis of Forming Reasons for Corner Cracks on Continuously Cast Heavy Slabs of 300 mm Thickness at Ansteel
鞍钢300mm厚板坯连铸角裂产生原因分析
10.
Study on the New Sizing Press Anvil
板坯SP调宽用新型侧压模块的研究
11.
Study on Curve of Pressure-thickness of MDF Mat and Its Application
中纤板压力-板坯厚度曲线的研究与应用探讨
12.
Analysis and Controlling Methods on Transverse Cracks of Plate Nb Containing Steel Slab
中厚板含铌钢铸坯横裂纹分析及控制措施
13.
Discussion on reducing breakout accident of casting slab for medium plate
减少中厚板坯连铸漏钢事故的实践探讨
14.
Discussion about Calculating Mode of Solidifying-skull's Thickness in Jinan Steel's Slab CCM
济钢板坯铸机凝固壳厚度计算模型的探讨
15.
Billet Surface Temperature Measuring in the Thick Board Factory of Jinan Steel Group
钢坯表面温度检测系统在济钢中厚板厂的使用
16.
Development and Application of High Efficiency Technology of Heavy Slab Casting Machine
鞍钢厚板坯铸机高效化技术的系统开发和应用
17.
APPLICATION OF BPS SYSTEM FOR WIDE SLAB CASTER IN SHAO GUAN STEEL
韶钢宽板坯连铸机漏钢预报系统的应用
18.
Study on Flow Field Optimization of Mould of Wide-Slab Continuous Casting by Water-modeling Experiments;
宽板坯结晶器内流场优化的水模实验研究