1) corrosion resistance
腐蚀性能
1.
Study on the corrosion resistance of ZE-1 zinc alloy;
ZE-1锌合金腐蚀性能的研究
2.
Effect of high current density electropulsing on the corrosion resistance of X70 pipeline steel;
脉冲电流处理对X70管线钢腐蚀性能的影响
3.
Hot corrosion resistance of a magnetron-sputter Ni16Co26Cr10Al nanocrystalline coating in molten salts;
溅射Ni16Co26Cr10Al纳米晶涂层的熔盐热腐蚀性能
2) corrosion property
腐蚀性能
1.
Effect of high temperature annealing on corrosion property of cathode aluminium foils;
高温退火对阴极铝箔腐蚀性能的影响
2.
5%NaCl solution were measured,the corrosion morphologies of the alloy were observed,and the effect of heat treatment on its corrosion property was analyzed.
5%NaCl溶液中的腐蚀速率和电化学参数的测试及其腐蚀形貌的观察,分析了热处理对该合金腐蚀性能的影响。
3.
In this paper, the corrosion property of NZS system decorative copper alloy under different plastic deformations is investigated, and the influences of grain size and annealing temperature upon the corrosion property discussed.
着重研究了ＮＺＳ系列装饰铜合金在不同塑性变形下的腐蚀性能。
3) Corrosion
[英][kə'rəuʒən] [美][kə'roʒən]
腐蚀性能
1.
Effect of Ce addition Combined with Ca or Sr on Corrosion of AZ91 Alloy;
Ce、Ca、Sr合金化对AZ91合金腐蚀性能的影响
2.
Effect of Ce,Nd Sr on the Microstructure and Corrosion Property of Magnesium Alloy AZ91;
Ce、Nd、Sr对AZ91镁合金显微组织和腐蚀性能的影响
3.
The recent research on properties of high temperature creep and corrosion of AZ91 magnesium alloy was remarked.
概述了AZ91镁合金抗高温蠕变性能和腐蚀性能方面的研究近况。
4) corrosion behavior
腐蚀性能
1.
Effects of Ce,Ca and Sr Mixing Addition on Corrosion Behavior of AZ91 Alloy;
复合合金化对AZ91镁合金腐蚀性能的影响
2.
The corrosion behavior of NiTi alloys in dilute chloride solutions, i.
NiTi B合金的耐腐蚀性能优于NiTi A合金。
5) corrosion performance
腐蚀性能
1.
The experimental studies of corrosion performance of wrought aluminium alloy Al-5.0Cu;
Al-5.0Cu合金腐蚀性能的试验研究
2.
The effects of technological parameters such as temperature and voltage on the microstructure,nanohardness and corrosion performance of 1Cr18Ni9 austenitic stainless steel treated by plasma based ion implanting and nitriding technique were investigated.
研究了等离子体注渗氮的温度和注渗电压对1Cr18Ni9奥氏体不锈钢注渗层组织结构、纳米硬度及腐蚀性能的影响规律。
3.
The dosage\'s impact to the de-calcium results and the corrosion performance of the agent were discussed.
考察了脱钙剂用量对脱钙效果的影响,以及对设备的腐蚀性能。
6) corrosion resistance
耐腐蚀性能
1.
Preparation and corrosion resistance of Ni-W-ZrO_2 composite coatings by electrodeposition;
Ni-W-ZrO_2复合镀层的制备及耐腐蚀性能
2.
Effect of microstructure on the corrosion resistance of Zr-Sn-Nb-Fe zirconium alloy;
显微组织对Zr-Sn-Nb-Fe锆合金耐腐蚀性能的影响
3.
Effect of chemical conversion film plus electroless nickel plating on corrosion resistance of magnesium alloy;
化学转化膜上沉积镍对镁合金耐腐蚀性能的影响
补充资料：体液腐蚀
体液腐蚀
corrosion in body fluids
t lye fushr体液腐蚀(eorrosion in body fluids)在体液中的金属腐性。体液是人(动物)体内溶解了多种物质的充气水溶液。溶解的物质有:电解质(如KCI和NaCI等)，在体液中离解成正和负离子(如Na+、K+和Cl一);也有非电解质(如葡萄糖、尿素和肌酸醉等)。在人体不同部位有不同体液‘如血液、唾液、淋巴液、关节润滑液等)，甚至同一部分的不同时刻，体液成分也不尽相同。所以材料的体液腐蚀研究往往采用等效人体环境，常用某些生理盐水作为等效体液。常用的等效体液有:(l)林格(Ringer)溶液;(2)汉克(Hank)溶液和(3)特劳德(Tyrode)溶液。 人体植入材料(如人工关节、心脏瓣膜)和医疗器械(如血液透析机)的迅速发展和更新，材料将会接触到多种体液、软组织和骨骼等，因此研究和检测材料在体液中的腐蚀行为，不仅要检测其化学稳定性、各种形式的腐蚀和磨损情况以及材料力学性能变化等，还要探索生物组织的适应性，包括无变态反应、无炎症反应、无毒性和无致癌性等。 人体植入材料使用广泛和比较成熟的有不锈钢(典型成分为Fe一lsCr一12Ni一ZMo)、工业纯钦和钦合金(典型合金有Ti一6AI一4V)、钻铬铂合金(典型成分为c。一30cr一6Mo)。钻铬钥合金的耐蚀性优于不锈钢，耐磨性优于钦。正在临床试用的还有多孔金属和陶瓷人工羊节，俺骨组织渗入到多孔材料中达到生理结合效果。有时也使用价格昂贵的钮、妮、金、银和铂等稀贵金属。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条