1) polyethylene terephthalate
聚对苯二甲酸乙二酯
1.
Blends of polypropylene/recycled polyethylene terephthalate (PP/r-PET), r-PET/maleic anhydride grafted PP (PP-g-MAH) and r-PET/glyceryl methacrylate grafted PP (r-PET/PP-g-GMA) were prepared by the aid of a twin-screw extruder.
采用双螺杆挤出机制备了聚丙烯(PP)／N收聚对苯二甲酸乙二酯(r-PET)、r-PET/马来酸酐接枝PP(PP-g-MAH)和r-PET/甲基丙烯酸缩水甘油酯接枝PP(PP-g-GMA)共混物,并研究了共混物组成、熔融温度与时间以及降温速率对共混物非等温结晶与熔融行为的影响。
2.
The effects of thermal treatment on crystallization,melting behaviour and mechanical properties of polypropylene/polyethylene terephthalate (PP/PET) blends were investigated.
研究了热处理对聚丙烯(PP)/聚对苯二甲酸乙二酯(PET)共混体系结晶、熔融行为及力学性能的影响。
3.
The influence of glass fiber, flame retardant and nucleating agent on the crystallinity and mechanical properties of polyethylene terephthalate (PET) was investigated.
研究玻纤、阻燃剂和纳米成核剂对聚对苯二甲酸乙二酯(PET)结晶性能及力学性能的影响。
2) poly(ethylene terephthalate)
聚对苯二甲酸乙二酯
1.
Research on non-isothermal crystallization kinetics of poly(ethylene terephthalate);
聚对苯二甲酸乙二酯非等温结晶过程研究
2.
The non-isothermal degradation processes of poly(ethylene terephthalate)(PET) and poly(ethylene 2,6-naphthalate)(PEN) blends were studied by using thermogravimetry(TG) analysis in nitrogen.
研究了惰性气氛下聚对苯二甲酸乙二酯(PET)/聚对萘二甲酸乙二酯(PEN)共混物的非等温热分解行为及其动力学。
3.
The poly(ethylene terephthalate) /montmorillonite nanocomposites are prepared by melt intercalation process and the crystallization behaviors, mechanical properties and dyeing properties of the fibers are studied in detail .
采用熔融插层法制备聚对苯二甲酸乙二酯(PET)/蒙脱土(MMT)纳米复合材料,对其纤维的结晶性能、力学性能及染色性能进行详细研究。
3) PET
[英][pet] [美][pɛt]
聚对苯二甲酸乙二酯
1.
Study on the Preparation, Structure and Properties of PET/Montmorillonite Based Nanocomposites;
聚对苯二甲酸乙二酯/蒙脱土纳米复合材料的制备及结构性能研究
2.
PET/nano BaSO4composites were manufactured by melt blending process.
通过熔融共混法制备聚对苯二甲酸乙二酯(PET)/纳米BaSO4复合材料,研究了纳米BaSO4对PET结晶行为、力学性能及热性能的影响。
3.
The research development of poly(ethylene terephthalate)(PET)blended with polypropylene (PP)was reviewed.
综述了聚对苯二甲酸乙二酯(PET)和聚丙烯(PP)共混的研究进展。
4) Poly(ethylene terephthalate)
聚对苯二甲酸乙二醇酯
1.
Poly(ethylene terephthalate)(PET)and PA5935 were blended in a high speed mixer,and then injected into specimense.
将聚对苯二甲酸乙二醇酯(PET)与PA5935高速共混,注射制样,样品的热性能、力学性能、阻燃性能和流变性能等测试结果表明,在PET中加入少量PA5935改善了PET抗熔滴性能与炭化性能,但结晶度、氧指数和部分力学性能下降。
2.
The immiscible poly(ethylene terephthalate)(PET)/polypropylene(PP)blend was prepared by melt mixing and its structural rheology was studied.
通过熔融共混制备了不相容的聚对苯二甲酸乙二醇酯(PET)/聚丙烯(PP)复合体系,研究了复合体系的结构流变学。
3.
The feasibility of in-situ microfibrillar method on recycling poly(ethylene terephthalate)(PET) and high-density polyethylene(HDPE) mixtures was carried out by four repetitive extrusion.
研究了原位微纤化方法在回收聚对苯二甲酸乙二醇酯(PET)和高密度聚乙烯(HDPE)混合物方面的应用。
5) PET
[英][pet] [美][pɛt]
聚对苯二甲酸乙二醇酯
1.
Interaction Parameters of the PET/PC and PET/Phenoxy Resin Blends;
聚对苯二甲酸乙二醇酯与聚碳酸酯及聚酚氧树脂间的相互作用参数
2.
Preparation of PET/MWNTs Nano Composite by Covalent Grafting;
多壁碳纳米管与聚对苯二甲酸乙二醇酯的接枝聚合
3.
The grafting product was used as the reactive compatibilizer of HDPE/PET blend and the influences of the compatibilizer on mechanical properties, thermostimulative shape memory function of blends were discussed.
结果表明:采用GMA/St双组分单体具有较高的接枝率,生成的接枝物对HDPE/聚对苯二甲酸乙二醇酯(PET)共混合金的增容效果较好;提高了体系的力学性能和热致形状记忆性能,且HDPE-g-(GMA-co-St)含量为5～10phr时,合金具有较好的综合性能。
6) Poly (ethylene terephthalate)
聚对苯二甲酸乙二醇酯
1.
The research on poly (ethylene terephthalate)/polycarbonate alloy was reviewed.
评述了近年来聚对苯二甲酸乙二醇酯(PET)/ 聚碳酸酯(PC)合金研究的最新工作,着重讨论了 PET/PC 合金酯交换与相容性的关系、第三组分增容 PET/PC、PET/PC 体系的结晶行为以及 PET/PC 合金的应用4个方面,并对 PET/PC 共混物的发展方向进行了展望。
补充资料：聚对苯二甲酸乙二酯
| 聚对苯二甲酸乙二酯 polyethylene terephthalate 见涤纶。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条