说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
您的位置：首页 -> 词典 -> 聚(对苯二甲酸乙二酯-co-己二酸乙二酯)
1)  Poly(ethylene terephthalate-co-ethylene adipate)
聚(对苯二甲酸乙二酯-co-己二酸乙二酯)
2)  poly(ethylene terephthalateco-1,4-cylclohexylenedimethylene terephthalate)
聚对苯二甲酸乙二醇-1,4-环己二甲醇酯
3)  PET [英][pet]  [美][pɛt]
聚对苯二甲酸乙二酯
1.
Study on the Preparation, Structure and Properties of PET/Montmorillonite Based Nanocomposites;
聚对苯二甲酸乙二酯/蒙脱土纳米复合材料的制备及结构性能研究
2.
PET/nano BaSO4composites were manufactured by melt blending process.
通过熔融共混法制备聚对苯二甲酸乙二酯(PET)/纳米BaSO4复合材料,研究了纳米BaSO4对PET结晶行为、力学性能及热性能的影响。
3.
The research development of poly(ethylene terephthalate)(PET)blended with polypropylene (PP)was reviewed.
综述了聚对苯二甲酸乙二酯(PET)和聚丙烯(PP)共混的研究进展。
更多例句>>
4)  Poly(ethylene terephthalate)
聚对苯二甲酸乙二醇酯
1.
Poly(ethylene terephthalate)(PET)and PA5935 were blended in a high speed mixer,and then injected into specimense.
将聚对苯二甲酸乙二醇酯(PET)与PA5935高速共混,注射制样,样品的热性能、力学性能、阻燃性能和流变性能等测试结果表明,在PET中加入少量PA5935改善了PET抗熔滴性能与炭化性能,但结晶度、氧指数和部分力学性能下降。
2.
The immiscible poly(ethylene terephthalate)(PET)/polypropylene(PP)blend was prepared by melt mixing and its structural rheology was studied.
通过熔融共混制备了不相容的聚对苯二甲酸乙二醇酯(PET)/聚丙烯(PP)复合体系,研究了复合体系的结构流变学。
3.
The feasibility of in-situ microfibrillar method on recycling poly(ethylene terephthalate)(PET) and high-density polyethylene(HDPE) mixtures was carried out by four repetitive extrusion.
研究了原位微纤化方法在回收聚对苯二甲酸乙二醇酯(PET)和高密度聚乙烯(HDPE)混合物方面的应用。
更多例句>>
5)  poly(ethylene terephthalate)
聚对苯二甲酸乙二酯
1.
Research on non-isothermal crystallization kinetics of poly(ethylene terephthalate);
聚对苯二甲酸乙二酯非等温结晶过程研究
2.
The non-isothermal degradation processes of poly(ethylene terephthalate)(PET) and poly(ethylene 2,6-naphthalate)(PEN) blends were studied by using thermogravimetry(TG) analysis in nitrogen.
研究了惰性气氛下聚对苯二甲酸乙二酯(PET)/聚对萘二甲酸乙二酯(PEN)共混物的非等温热分解行为及其动力学。
3.
The poly(ethylene terephthalate) /montmorillonite nanocomposites are prepared by melt intercalation process and the crystallization behaviors, mechanical properties and dyeing properties of the fibers are studied in detail .
采用熔融插层法制备聚对苯二甲酸乙二酯(PET)/蒙脱土(MMT)纳米复合材料,对其纤维的结晶性能、力学性能及染色性能进行详细研究。
更多例句>>
6)  PET [英][pet]  [美][pɛt]
聚对苯二甲酸乙二醇酯
1.
Interaction Parameters of the PET/PC and PET/Phenoxy Resin Blends;
聚对苯二甲酸乙二醇酯与聚碳酸酯及聚酚氧树脂间的相互作用参数
2.
Preparation of PET/MWNTs Nano Composite by Covalent Grafting;
多壁碳纳米管与聚对苯二甲酸乙二醇酯的接枝聚合
3.
The grafting product was used as the reactive compatibilizer of HDPE/PET blend and the influences of the compatibilizer on mechanical properties, thermostimulative shape memory function of blends were discussed.
结果表明:采用GMA/St双组分单体具有较高的接枝率,生成的接枝物对HDPE/聚对苯二甲酸乙二醇酯(PET)共混合金的增容效果较好;提高了体系的力学性能和热致形状记忆性能,且HDPE-g-(GMA-co-St)含量为5～10phr时,合金具有较好的综合性能。
更多例句>>
补充资料：聚[3,3-双(氟甲基)氧杂环丁烷]
分子式：
CAS号：

性质： 以氟原子取代氯的卤化聚醚树脂类似物。同氯化聚醚一样，经拉伸和极化处理的该类树脂也表现出压电和热电性质。由于分子中碳氟键的极性比碳氯键大，预期在热电性质方面具有优越性质，而且氟取代物的碳氟键能高，其化学稳定性要好于氯取代类似物。聚[3,3-双(氟甲基)氧杂环丁烷]的合成与聚[3,3-双(氯甲基)氧杂环丁烷]的制备类似，首先合成3,3-双(氟甲基)氧杂环丁烷，然后利用开环聚合反应得到该聚合物。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条