1.
Effects of dynamic shear modulus ratio and velocity on surface ground motion and their equivalent relations
动剪切模量比与剪切波速对地震动影响及等量关系研究
2.
Experimental Study on Relation between Dynamic Elastic Modulus and Shear Modulus of Soil;
土体动弹性模量与动剪切模量关系对比研究
3.
Comparison of the Relaxation Moduli in Step Strain and the Generalized Elastic Moduli in Dynamic Shear of Polydimethylsiloxane
PDMS在阶跃应变中松弛模量与动态剪切中广义弹性模量的比较
4.
Experiment and Application Studies on Dynamic Shear Modulus and Damping of Geotechnical Media
岩土动剪切模量阻尼试验及应用研究
5.
Effect of Consolidation Time on Dynamic Shear Modulus of Soft Clay
固结时间对软粘土动剪切模量的影响
6.
Determination of master curve of dynamic shearing modulus of asphalt mixture
沥青混合料动态剪切模量主曲线的确定
7.
Testing Study on Dynamic Shear Modulus and Damping Ratio of Conventional Soils in Fuzhou
福州常规土类动剪变模量与阻尼比的试验研究
8.
Modification of SCG Model for Shear Modulus Calculation
一个修正的SCG剪切模量计算模型
9.
Numerical Simulation of Scale-effect of Shear Box Experiment;
剪切盒实验比尺效应的数值模拟研究
10.
" Colourless optical glass test methods--Young's modulus, torsional rigidity modulus, Poisson's ratio"
GB/T7962.23-1987无色光学玻璃测试方法杨氏模量、剪切模量及泊松比测试方法
11.
The derived dry bulk modulus must be positive and greater than 2/3 of shear modulus to insure a positive lame constant and Poisson's ratio.
提取的干燥体变模量必须为正，并且大于剪切模量的2/3，以保证拉梅常数和泊松比为正。
12.
Mechanical Parameter and Energy Model of Rotary Cutting Head Flying Shears
滚筒式切头飞剪力能参数与能量模型
13.
Estimation of the Deformation-Modulus in Sandy Soils by the Shear-Modulus of pressuremeter Test
用旁压剪切模量推算砂性土地基的变形模量
14.
Experimental study on effect of shear strain accumulation on dynamic shear modulus and damping ratio of clay soil
应变累积对黏土动剪模量和阻尼比影响的试验研究
15.
Shear Bands in Cu_(46)Zr_(54) Metallic Glasses and the Effects of Pores: A Molecular Dynamics Study;
Cu_（46）Zr_（54）非晶合金剪切带分子动力学模拟及孔洞对剪切带的影响
16.
Analysis on the shear modulus of MR elastomer based on chain-like model
基于链化分析的磁流变弹性体剪切模量模型
17.
" Metallic material-Standard test method for the Young's modulus, shear modulus and Poison's ratio (Dynamic method)"
GB/T2105-1991金属材料杨氏模量、切变模量及泊松比测量方法(动力学法)
18.
A Comparative Study of Laminated Piezobeam with Extension and Shear Actuation;
拉伸致动和剪切致动压电层合梁的对比研究