1.
Data and Test Analysis of Lost Efficacy on the Welding Welding Connection in the Coke Tower between Chack Tower between Tower Body and Its Skirt;
焦炭塔裙座与塔体连接焊缝失效的数值与试验分析
2.
All gas line joints shall be orbital welded except those connecting to valves.
所有气体管路的连接采用无缝焊接。
3.
Experimental study of butt-welded connections subjected to axial tension
轴向拉伸作用下对接焊缝连接性能的试验研究
4.
Experiment of butt-welded connections subjected to axial tension
轴向拉伸作用下对接焊缝连接性能的试验
5.
Welding to Fillet Weld Crackle of Superheater Connecting Screw Plug for 1 025 t/h Boiler
1025 t/h锅炉过热器连接管螺塞角焊缝裂纹的焊接
6.
Ceramic Cushion of Steel Pipe Weld Aided Device and Its Welding Procedure
钢管焊缝陶瓷垫补焊装置及焊接工艺
7.
Cracks that have developed in the web at lateral connection plates have generally occurred because of intersecting welds.
腹板在水平连接板处出现裂纹，通常是由于有交叉焊缝。
8.
Comparison on Weld Construction and Connection Calculating Method in National and Abroad Steel Structure Codes
国内外钢结构规范焊缝构造与连接计算方法的比较
9.
Jioning Interface Behavior of SiC/Zn-Al and Strengthening Mechanism of Bond Metal with Aid of Ultrasonic Vibration
超声波作用下SiC与Zn-Al连接界面行为及焊缝强化机理
10.
Indicates concave, convex or flush welds. Increase height to fit above other weld symbol.
指示凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接符号。
11.
The second crack is a crack originating at the groove weld toe of the column flange-girder flange connection.
第二种是产生于立柱翼缘与主梁翼缘连接处的坡口焊缝焊趾处的裂纹。
12.
Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger
换热器管-管板角焊缝焊接质量的控制
13.
Automatical EB Welding of Curved Weldment
工件平面曲线焊缝的电子束自动焊接
14.
Development of the Longitudinal Seam Welding Equipment Used for Automobile Rear Axle;
全自动汽车车桥直焊缝焊接设备研究
15.
The Study of the Horizontal Residual Stresses of the Butt Welded Joint of Steel Member;
钢构件对接焊焊缝横向残余应力研究
16.
Study of Length Calculation of Three Side Welded Lap;
三面围焊搭接角焊缝长度计算的探讨
17.
In-situ detection of weld metal thermal cycle of 10CrMo910 steel
10CrMo910钢焊缝焊接热循环的实时检测
18.
Application of the electrogas welding for the blast furnace jacket
气电立焊在高炉炉壳立缝焊接的应用