1.
Modeling of Segmented Primary Mirror Surface Control System for Space-based Telescope
空间望远镜分块式主镜面形控制系统建模
2.
Study on the Surface Figure Changes or primary Mirror Centerally Supported Under Gravity Load
自重作用下中心支撑主反射镜面形变化研究
3.
A curved mirror distorts the features.
弯曲的镜面使容貌变形。
4.
Structural Performance Simulation and Mirror Surface Form Analysis of Optical Mirrors;
光学镜组结构性能仿真与镜面面形分析
5.
Continuous surface deformable mirror will be destroyed if the relative displacement of adjacent actuators is too far.
对于连续镜面变形镜，相邻驱动器的相对位移过大会损坏变形镜。
6.
A thicket of small pistons, or actuators, push on the back of the mirror to fine-tune its shape.
而镜子背面有一组小活塞，移动微调镜子的形状。
7.
a reflecting telescope that has a paraboloidal primary mirror and a hyperboloidal secondary mirror; light is brought to a focus through an aperture in the center of the primary mirror.
具有抛物面主镜和双曲面次镜的一种折射式望远镜；光线被集中到主镜中心的孔径。
8.
A single cylindrical wavefront impinges on both prisms.
一个圆形波阵面射到两个棱镜上。
9.
Measurement of optical surface and foci of long focal length lens by CGH
计算全息法测量长焦透镜面形和焦距
10.
A Side-Pumping Method of Double-Clad Fiber by Trapezoidal Micro-prism
双包层光纤梯形微棱镜侧面耦合技术
11.
The shopkeeper showed him a round mirror and said to him laughing,
店主拿来一面圆镜给他看并笑着说：
12.
Experiment system of 400 mm thin-mirror active optics
400mm薄镜面主动光学实验系统
13.
a concave lens [mirror]
凹透镜 [凹面镜]
14.
Focal plane:The plane where light entering a lens forms a sharp image.
焦面:光线经过镜头后形成清晰影象的平面。
15.
New method of mirror surface figure treatment in optical engineering analysis
光学工程分析中的镜面面形处理新方法
16.
Realization of Velocity Mode in Flat Optics Machining Using Ion Beam
光学平面镜面离子束修形中速度模式的实现
17.
Three-Dimensional Shape Measurement of Aspheric Mirror Based on Fringe Reflection
基于条纹反射的非球面镜三维面形测量
18.
Shape from Shading for Specular Surfaces under Perspective Projection
透视投影下的镜面反射表面形状恢复新算法