1.
The probable effects of seismic disturbance are also lateral loads. The dynamic effects of crane movement may also be considered, in part, as lateral load.
可能的地震效应也是侧向荷载。吊车活动产生的动力效应也部分地计人侧向荷载。
2.
Research on Lateral Force and Target Displacement of Frame;
框架结构侧向荷载作用方式与目标位移研究
3.
Study on Distribution Pattern of Lateral Force in Earthquake Response of Structure;
结构抗震分析中侧向荷载分布模式的研究
4.
ANALYSIS OF INFILLED FRAMES SUBJECTED TO LATERAL FORCES
框架填充墙结构侧向荷载作用受力分析
5.
Research on Lateral Load Patterns in Pushover Analysis of Vertically Irregular Structures
竖向不规则结构Pushover分析的侧向荷载分布模式研究
6.
Influence of lateral load pattern on the results of Pushover analysis on hybrid structure
侧向荷载分布方式对混合结构Pushover分析结果的影响
7.
The loads for which a building must be designed may be classified into dead loads,vertical live loads,and lateral live loads.
设计建筑物必须考虑的荷载可分为恒载、竖直活荷载和侧向活荷载。
8.
Tripping Calculation and Analysis for Stiffeners under Axial Compression、Lateral Pressure;
纵向及横向载荷作用下的骨材侧倾稳定性研究
9.
empty-side uniformity load
空载侧线路均布载荷
10.
load-side uniformity load
重载侧线路均布载荷
11.
THE APPROXIMATE ANALYSIS OF STRENGTH ON THE STRAIGHT WALL ARCH ROCK CAVE SUBJECTED TO TRANSVERSE BLASTING LOADING
侧向爆炸荷载下直墙拱形岩洞强度的近似分析
12.
Calculation of lateral buckling critical load of crossbeam on frame for hoisting blowout preventer. CPM
封井器吊装架横梁的侧向屈曲临界载荷计算
13.
Study on the side-instability problem of the thin-wall bar under spatial assembled loads
空间组合荷载下薄壁杆件侧向失稳问题的研究
14.
Study on Numerical Simulation of Pile Shaft Resistance Curves under Vertical Load;
竖向荷载作用下桩侧阻力曲线的数值模拟研究
15.
An Method to Calculate the Frame Elastic Lateral Displacement Consider the Influence of Vertical Load;
考虑竖向荷载影响的框架层间弹性侧移计算
16.
Studies on Bearing and Deformation Mechanism and Shaft Resistance Degradation of Super-long Piles under Vertical Loading;
竖向受荷超长桩承载变形机理与侧阻软化研究
17.
The Transient Response of Shells under Lateral Impulsive Loading;
壳体在侧向脉冲载荷作用下的瞬态响应
18.
Conventional earthquake-resistent design involves engineering that a structure under design can carry a set of static lateral.
传统的抗震设计要确保所设计的结构物能承受一组侧向静载荷。