1.
PRODUCTION PRACTICE OF ENHANCING EQUILIBRIUM RATIO OF THE MINUS-DEVIATION ROLLING IN THE HOT ROLLED ANGLE
提高热轧角钢负偏差轧制均衡率的生产实践
2.
The introduction of trade standard of HR angle for iron tower
铁塔用热轧角钢行业标准的制定情况介绍
3.
Hot rolled stainless steel with equal leg angles
GB/T4227-1984不锈钢热轧等边角钢
4.
" Hot-rolled hexagonal and octagonal steel bars-Dimensions, shape, weight and tolerance"
GB/T705-1989热轧六角钢和八角钢尺寸、外形、重量及允许偏差
5.
" Hot-rolled equal--leg angle steel--Dimensions, shape, weight and tolerances"
GB/T9787-1988热轧等边角钢尺寸、外形、重量及允许偏差
6.
Research on Stability for Axially Compressed Hot-Rolled Single--Angle Members;
热轧单角钢轴心受压构件整体稳定性能研究
7.
Hot rolled stainless steel sheets and plates
GB/T4237-1992不锈钢热轧钢板
8.
Experiment-rolling Pipeline Steel X60 in 2300 mm Hot-rolling Line of Benxi Iron & Steel(Group) Co.,Ltd.
本钢2300mm热轧机组试轧X60管线钢
9.
Flying shears control model for 1580mm hot strip mill in the Third Hot Rolling Plant of WISCO
武钢三热轧1580mm热连轧机飞剪控制模型
10.
Heat-rolled window sash steel
GB/T2597-1994窗框用热轧型钢
11.
DEVELOPMENT OF 3.0mm×485mm HOT-ROLLED NARROW STRIP
3.0mm×485mm热轧窄带钢的开发
12.
butterfly angles pass
轧制角钢用蝶式孔型
13.
" Hot-rolled unequal--leg angle steel--Dimensions, shape, weight and tolerances"
GB/T9788-1988热轧不等边角钢尺寸、外形、重量及允许偏差
14.
Experimental Research on Overal Stability for Eccentrically Compressed Q460 Hot-Rolled Single-Angle Members
两端偏心受压的Q460热轧等边单角钢整体稳定承载力试验研究
15.
Width Tolerance of Cold or Hot-rolled sheet
冷轧或热轧钢片阔度公差
16.
Selection on Dust Plan of AISC 1780 Hot Finished-rolling Mill
鞍钢1780热轧精轧机除尘方案的选择
17.
The Study on Microstructure Transformation Behavior of CSP Hot Rolling Strip in Rolling Process;
CSP热轧带钢轧制中组织演变行为研究
18.
Analysis on Causes of Work Roll Breaking on Finishing Mill;
武钢热轧厂精轧工作辊断裂原因分析