1.
Testing and Numerical Fitting of Cornering Stiffness of 7.50R20 14PR PW02 Tire
7.50R20 14PR PW02型轮胎侧偏刚度的试验与拟合
2.
Influence of Mill Bilateral Stiffness Difference on Hot Rolled Wide Heavy Plate Thickness Deviation
轧机两侧刚度差异对热轧宽厚板两侧厚度偏差的影响
3.
Influence of the Sidewall Off-Set Angle on the Rigidity and Stability of Bellow;
侧壁偏角对膨胀节刚度与稳定性的影响
4.
Influence of Bilateral Stiffness Difference of Wide Heavy Plate Mill on Thickness Deviation between Two Sides of Plate
宽厚板轧机两侧刚度差异对两侧板厚偏差的影响
5.
A method of the determination of the tire side-slip characteristics, vertical and tangential stiffness and damping is given.
提出了轮胎的侧偏特性、向和切向轮胎刚度阻尼的确定方法。
6.
Research on the Side Rigidity Matching Based on Improving the Vehicle Performance in Side Impact;
基于侧面碰撞安全性的车辆侧面刚度匹配研究
7.
Optimal Analysis for Lateral Stiffness in Mid-highriseRC Frame Shearwall Structure with Special-shaped Columns;
中高层异形柱框剪结构抗侧刚度优化
8.
Story Lateral Stiffness and Stability Analysis of Tilted Column Frame;
斜腿框架的层抗侧刚度及稳定性分析
9.
Lateral rigidity and shear resisting capacity of multi-ribbed composite wall
密肋复合墙板抗侧刚度及承载力研究
10.
Effect of Tire Rolling Speed on Cornering Characteristics of Vehicle
轮胎滚动速度对车辆侧偏特性的影响
11.
Study on Lateral Bearing Capacity and Lateral Stiffness of Prestressed Brick Walls;
集中式预应力砖墙的抗侧强度及抗侧刚度计算方法的研究
12.
Analysis and Research of Temperature Effect in the Structure on the Condition of Different Side-displacement Rigidity;
不同侧移刚度条件下结构温度效应的分析研究
13.
There are three calculated methods for lateral stiffness in current code.
根据现行规范,楼层侧向刚度的计算方法有3种。
14.
The Research of Lateral Stiffness of Wall in Brick Buildings with Bottom-framed;
底框—抗震墙结构墙体侧向刚度计算方法的研究
15.
Study on Changes of the Lateral Stiffness and the Control Methods in Tall Building Structures;
高层建筑结构侧向刚度变化及其控制方法研究
16.
Analysis on effective length of column in semi-rigid jointed steel frames with lateral displacements;
有侧移半刚性连接钢框架柱计算长度的研究
17.
Research on Stiffness Degradation of Concrete Frame-shear Wall
R.C.框架—剪力墙结构抗侧刚度的退化研究
18.
Lateral Rigidity and Capacity Analysis of Assembly Temporary Bearing Frame
装配式临时架体的抗侧刚度及承载力分析