1.
Rigid Element Analysis for Stamping Springback Simulation;
冲压成形回弹仿真的刚性单元法研究
2.
The Study of Geometric Nonlinear Element Stiffness Matrix and the Analysis of Deforming Behavior of Portal Frame with Tapered Members;
几何非线性单元刚度矩阵研究以及变截面门式刚架变形性能分析
3.
The plastic elemental stiffness matrix was derived by plastic-hinge method.
然后用塑性铰法推导了单元的塑性刚度矩阵。
4.
The stiffness of the elements in this case would be that of a supporting pier or elastomeric bearing pad or a combination of these.
诸单元的刚度则是指支承墩的刚度或弹性支承垫板的刚度或这些的合成的刚度。
5.
The stiffness matrix of synthetic dual plate-spring interlayer element is deduced.
导出了双层板―性夹层的综合单元刚度矩阵。
6.
Experimental Study on Semi-Rigid Joint and Basic Load-Bearing Element in Plug-pin Steel-tube Scaffold;
插销式钢管脚手架半刚性节点及基本受力单元体试验研究
7.
Updating semi-rigidity of joints and boundary conditions of structures using a hybrid finite element
利用一种混合梁单元修正结构半刚性节点及边界条件
8.
Based on this kind of matrix and the one of ordinary plate element individually, the vibration behaviour of a column structure is calculated and the results are compared.
用这种综合单元刚度矩阵与普通板单元刚度矩阵对立柱结构的振动特性进行了有限元法计算对比。
9.
The element siiffness matrix and the geometric stiffness matrix etc. are explicitly presented.
单元的刚度矩阵和几何刚度矩阵全部显式给出。
10.
Since the transform relation between area coordinates and Cartesian coordinates is linear, the formulation of the element stiffness matrix is rather simple.
由于面积坐标和直角坐标之间为线性变换关系，因此单元刚度矩阵的推导相当简单。
11.
A New Torsional Stiffness Matrix of Thin-Walled Bar Elements
一种新的薄壁杆件单元扭转刚度矩阵
12.
Research on Technique Parameters of Single Point Diamond Turning of DOEs
衍射元件单点金刚石车削的工艺参数
13.
Calculating methods for section rigidity of reinforced concrete beam element
钢筋混凝土梁单元截面刚度求解方法
14.
STRESS AND STIFFNESS ANALYSIS OF BI-ADHESIVE BONDED SINGLE-LAP JOINTS
混元胶接单搭接头的应力与刚度分析
15.
The simplest rapier loom is known as the single rigid rapier.
最简单的剑杆织机是刚性单剑杆织机。
16.
Experimental Research and Finite Element Analysis on Semi-Rigid Joints of Gabled Frames
门式刚架半刚性节点的试验研究及有限元分析
17.
I've just got my bank statement and I'm afraid I'm in the red.I've overspent by$50.
我刚刚收到我的银行结单，恐怕我已有赤字，我已超支50美元。
18.
The stiffness matrix and geometric stiffness matrix of rectangular tube-in-tube element of which the cross-section has bisymmetric axes are developed.
导出了截面含双对称轴的矩形筒中筒单元刚度矩阵和单元几何刚度矩阵。