1.
On the influence of the bending moment waveform disturbance on the pure bending beam flexion
弯矩波形扰动对纯弯梁弯扭屈曲的影响
2.
When shearing force or axis force is relatively great, great errors of moment arise when the method of pure bending is employed.
当剪力或轴力较大时,用纯弯曲方法计算弯矩误差很大。
3.
The Research on Component of Firber Reinforced Polymer Combined Magnesite Concret about Performance of Pure Bending;
玻璃钢—菱镁混凝土复合构件纯弯性能研究
4.
Local Stability of Web of Castellated Beams under Uniform Moment;
纯弯状态下蜂窝梁腹板的局部稳定性分析
5.
Section nonlinear analysis of salt-freezing reinforced concrete pure bending component based on damage theory
盐冻损伤钢筋混凝土纯弯构件截面非线性分析
6.
Strength Deformation Behaviour of Circular Concrete Filled Steel Tubes Subjected to Pure Bending
纯弯作用下圆形钢管混凝土的强度变形性能
7.
Open Cross-Section Beams Under Pure BendingⅡ.Finite Element Simulation
纯弯曲开口横截面梁的有限元模拟分析
8.
Plastic-formation analysis and springback calculating of thin-wall tube pure-bending
薄壁管纯弯曲塑性成形分析及回弹计算
9.
Exact elastoplastic analysis of a functionally graded beam subjected to pure bending
功能梯度纯弯曲梁弹塑性问题的解析解
10.
Meanwhile, the springback potential energy principle is applied to calculate the springback deformation of a pure bending of curved beam.
同时，应用该回弹势能原理于纯弯曲梁的回弹变形计算。
11.
In a beam type compensator a stress pattern produced by pure bending is frozen into the material.
在梁式补偿器中，其应力光图是由纯弯曲产生而被冻结在材料之中。
12.
These formulas give us the stress and strain in a prismatic beam when it subjected to pure bending.
当棱柱形梁受纯弯曲时，这些公式给出了它的主力和主变。
13.
According to the original assumption, this theory should be applied only to long, thin beams loaded in pure bending.
根据原来的假定，这个理论只适用于受纯弯曲载荷的长而薄的梁。
14.
APPROXIMATING CALCULATION OF PEELING-OFF STRESS IN CONCRETE COVER OF PURE BENDING SECTION OF FRP STRENGTHENING RC BEAMS
纤维复合材料加固混凝土梁纯弯段保护层剥离应力近似计算
15.
Yielding control of tape spring for deployable structures during the pure bending buckling
空间可展结构卷尺弹簧纯弯曲过程中的屈服控制
16.
Experimental Study on High-Strength Concrete Filled Square Steel Tubular Beam with Inner CFRP Circular Tube
内置CFRP圆管方钢管高强混凝土纯弯构件力学性能的试验
17.
Effects of Bending in Flatwise Bending Mode on Mechanical Properties of Pure Titanium Miniplates;
平面弯曲方式下弯制对纯钛小型接骨板机械性能的影响
18.
Rubber or plastics hoses and tubing--Bending tests
GB/T5565-1994橡胶或塑料软管及纯胶管弯曲试验