1.
transfer header
连续自动式凸缘件镦锻机
2.
The Design and Analysis of a New Structure Full-Fiber Crankshaf Upsetting-Bending Hydraulic Press
全纤维曲轴弯曲镦锻液压机新结构设计及分析
3.
Research on the Upset Forging Technology of Marine Crank of 305 Crankshaft
船用305曲轴曲拐镦锻成形工艺研究
4.
Research on local upsetting finish forging process of valve blank
气门毛坯局部镦挤终锻成形工艺研究
5.
Analyzing the Cause of 42CrMo Crankshaft Cracking by Upset Forged
42CrMo曲轴镦锻开裂原因分析
6.
Development and application of a CAD/CAE system for the TR forging die for crankshaft
曲轴TR镦锻模具CAD/CAE系统开发与应用
7.
Failure analysis of upset-bending equipment for a heavy crankshaft with continuous grain flow
大型全纤维曲轴TR镦锻装置失效分析
8.
Study on Eliminating Forging Accessorial Block of the Continuous Grain Flow Crankshaft Which Forming in the RR-equipment
全纤维曲轴RR镦锻消除锻造余块的工艺探索
9.
double-stroke solid-die automatic cold header
双击整模自动冷镦机
10.
multi-station automatic nut cold header
多工位螺母自动冷镦机
11.
The Method of Upsetting Short Steel Ring in Hot State for Measuring the Blow Energy of Hammer
用钢质短圆环热镦粗法测定锻锤打击能量
12.
Process Research and Numerical Simulation for Upsetting Forming on the End of the Oil Tube;
油管端部镦锻成形工艺研究及其数值模拟
13.
FEM Simulation of RR Method Bend-Upset Forging of Heavy Crankshaft;
大型曲轴RR法弯曲镦锻成形有限元模拟
14.
In this paper,an extrusion-forging process for a knuckle of Benz heavy truck is introduced,which includes four steps: Upsetting,extrusion,pre-forging and forging.
奔驰重型卡车的转向节挤压锻造工艺,分为镦粗、挤压、预锻和终锻4个工步。
15.
multi-station bolt automatic combined cold header
多工位螺栓联合自动冷镦机
16.
high-efficiency four-operation cold header
四工位高效率螺帽冷镦机
17.
Research on Copper Water Box Closed-Die Upsetting-Extrusion Process of Turbine;
汽轮发电机铜水盒闭式镦挤工艺研究
18.
Design and Development of Z310 Forging Machine;
Z310型三工位联合冷镦机的设计与开发