1.
Modeling and Simulation of Autonomous Underwater Vehicle's Load Separation
自主式水下航行器载荷分离运动仿真研究
2.
Notices of Jinshan Separation-type Overpass Static Load Test
金山分离式立交桥静力荷载试验要点分析
3.
irregularly distributed load
非匀布荷载;不规则分布荷载;不均匀分布荷载;不平匀分布荷重
4.
SEPARATED VARIABLE APPROACH TO THE BENDING STRESS ANALYSIS OF THE BEAM UNDER GENERAL TRANSVERSE DISTRIBUTED LOAD
受横向分布载荷直梁弯曲应力分析的分离变量解法
5.
The loads for which a building must be designed may be classified into dead loads,vertical live loads,and lateral live loads.
设计建筑物必须考虑的荷载可分为恒载、竖直活荷载和侧向活荷载。
6.
Adaptive Identification of Separated Bulk-matter Impact Load Based on Principle of Approaching Recursive Filter
基于逼近递推滤波原理的大块分离物冲击载荷自适应辨识
7.
Finite Elemtnt Analysis of Cable-Stayed Bridge under Static and Wind Loadings;
静载荷与风载荷作用下的斜拉管桥有限元分析
8.
Analysis of Estimating Ultimate Loading and Static Test of Screw Pile Under Inclined Loading
承压螺旋桩斜向荷载试验与极限荷载判定分析
9.
Analysis of horizontal buckling loads of structure with consiering the influence of vertical loads
考虑竖向荷载影响的结构水平临界荷载分析
10.
Analysis on load transfer for caped piles under large area of embankment
大面积路堤荷载下带承台桩的荷载传递分析
11.
IDENTIFICATION OF BENDING MOMENT LOADINGS RESULTING IN CRACK DAMAGE OF CLUTCH CASE
导致离合器壳体破裂的弯矩载荷识别
12.
Analysis on the circumscription of the heavy camion and its limited loading
重型载重车辆加载安全区域与极限载荷分析
13.
Analysis results indicate: shroud tightness is determined by pre-twist angle of shroud and working load, the centrifugal force plays a main role to the tightness change.
分析结果表明,叶冠的紧度由预扭角和工作载荷决定,离心力对紧度的变化起主要作用。
14.
Four pionts angle contact ball bearing is separable bearing,it can be subject to bi-directional load and have the function of both single row and double rows bearings.
四点接触球轴承为可分离型轴承，可承受双向轴向载荷，并有单列和双列角接触球轴承的功能。
15.
Fea of the Misalignment of the Centrifugal Pump and Driver Shafts Due to External Load;
离心泵泵嘴载荷对泵轴与电机轴不对心度影响的有限元分析与研究
16.
Second, measure the load of the gear and its revolutional speed in step, and change the load distribution on time into another load distribution on loaded numbers.
制谱时应把载荷时间分布按载荷—转速规律化为载荷次数分布,然后进行制谱。
17.
Survey Results for Concrete Construction Live Loads and Analysis of Load Effects Using Influence Surfaces
建筑施工期活荷载统计分析及荷载效应影响面分析
18.
Fragment distribution analysis of masonry wall under blast load
爆炸荷载作用下砌体墙碎片分布分析