1.
On Development of Reducer Entry Simulation Software Based on Pro/Engineer;
基于Pro/E平台的减速器拆装仿真软件的开发
2.
Disassembly and Assembly Simulation Design for the Reduction Gear;
减速器拆装的仿真设计——Visual Basic.NET二次开发AutoCAD
3.
Dynamic Simulation of Decelerator’s Disassembling, Assembling and Working Principle Based on SolidWorks
基于SolidWorks的减速器拆装及工作原理动态仿真
4.
Analysis Research Disassembles Which Based on VB.NET Reduction Gear Middle Axle
基于VB.NET减速器中轴拆装的分析研究
5.
Virtual Assembly and Disassembly of Reducer Based on Cult3D
基于Cult 3D的齿轮减速箱虚拟拆装
6.
Final drive is two-stage planetary reduction gear mechanism. It is mounted at outside of steering and braking clutch. Combined sprocket segment is very convenient for assembling, disassembling and service.
终传动为两级行星传动减速机构，装在转向与制动离合器外侧，组合式链齿、拆装，维修极其方便。
7.
internally geared motor
内装减速器的电动机
8.
Measures intended to decelerate the arms buildup.
意为减慢武器装备更新速度的方法
9.
Research on Measure Apparatus of Assembly Size of the Gear Reducer of Automobile;
汽车差减速器装配尺寸测量仪的研究
10.
Research on the Technique of Virtual Assembling of Speed Reducer Based on VRML;
基于VRML的减速器虚拟装配技术研究
11.
Implementing the Design and Simulated Assembly of Reducer by Solidworks;
用Solidworks实现减速器的设计与虚拟装配
12.
Orthogonal Testing Optimum Design in Loader Wheel-side Reducer
装载机轮边减速器正交试验优化设计
13.
Based on the assembly sequence reducer planning study
基于减速器的装配序列规划方法研究
14.
Remove vibration damper (refer to vibration damper removal in this section).
拆卸减震器（请参阅本节中的减震器拆卸）。
15.
"Disconnect shifting linkages from transmission, hand-Brake linkage or spring, and speedometer cable."
从变速器上拆下换档装置、手制动装置或弹簧以及里程表传动软轴。
16.
DISCONNECT THE INPUT SPEED SENSOR.
拆除输入速度感知器。＊＊
17.
RKE Receiver Remove/Install
RKE接收器拆卸/安装
18.
Demister Duct Remove/Install
除雾器管拆卸/安装