1.
Study on Cold Cracks Sensibility of Spherical Tanks by Re-welding
在役球罐再次组焊冷裂纹敏感性研究
2.
The Modeling and Simulation of Thermal Warpage of PCBA During the Reflow Soldering;
PCB组件在再流焊过程中热变形的建模与仿真
3.
The reason analysis of leakage at welding seam of reheater tube supports in 660MW unit
660MW机组再热器管间支撑焊缝泄漏原因分析
4.
"The entry section is started again. The strip of next coil passes through welder, bridle, goes into deoiling section. "
再次启动入口段,让后继带钢通过焊机、张力辊进入脱脂段
5.
Excellent in solderability and high heat resistance with either flow or reflow soklering.
可焊性和耐焊性优，适用于流焊和再流焊。
6.
Remove the object from any account group memberships and retry.
从帐户组成员身份删除对象，再试一次。
7.
Install all of the following components and run this scenario again.
安装以下所有组件并再次运行此方案。
8.
Scar tissue can cause the artery to became narrow again.
瘢痕组织能够造成动脉再次变窄。
9.
Scar tissue can cause the artiry( artery) to become narrow again.
疤痕组织可能导致动脉再次变窄。
10.
They decided to organize a second visit to it.
他们决定再组织去那里参观一次。
11.
Your user name/password combination was not correct. Please try again.
您的用户名/密码组合错误，请再试一次。
12.
Numerical simulation of microstructure evolution for dynamic recrystallization of GH4169 during inertia friction welding
GH4169惯性摩擦焊接过程动态再结晶组织演化的数值模拟
13.
Energizing the machine "start" switch places the machine in an automatic single cycle operation that completes the element assembly.
开动机器，进行一次自动循环运转就完成极群组的铸焊。
14.
Study of Flux for Microelectronics Soldering and Microstructure of Solder Joint;
微电子焊接助焊剂及其焊点组织研究
15.
The specified grouping is overlapping with other groupings and cannot be processed. Check the grouping and try again.
指定的分组与其他分组重叠，不能被处理。请检查分组，然后再试一次。
16.
ORS Over Reflow Soldering
再流回焊接，SMT元件的焊接方式
17.
Research on Simulation of Reflow Soldering Process of SMT
SMT再流焊焊接工艺仿真技术探讨
18.
The influence of SMT reflow soldering temperature curve on the welding quality
SMT再流焊温度曲线对焊接质量的影响