1.
Research on Lateral Unloading Stress Path and Wall Deformation For Foundation Pit;
基坑侧向卸荷应力路径及挡墙侧向变形研究
2.
EXPERIMENTAL STUDY OF EARTH PRESSURE FOR ANISOTROPIC SAND CONSIDERING LATERAL DISPLACEMENT
考虑侧向变形的各向异性砂土土压力试验研究
3.
Inclinometer is an instrument for measuring lateral deformation of soils and foundation.
测斜仪是测试土体侧向变形的一种仪器。
4.
Calculating Methods for the Foundation Settlement of Considering Lateral Deformation and Settlement Prediction;
考虑侧向变形的地基沉降计算及沉降预测
5.
ANALYSIS OF LATERAL DEFORMATION OF DEEP FOUNDATION PIT SUPPORTING WITH STEEL REINFORCED CEMENT-SOIL PILE
型钢水泥土桩支护深基坑侧向变形分析
6.
Laboratory Test and Calculating Method Research on the Settlement of Roadbed Caused by Lateral Deformation;
由侧向变形引起的路基沉降室内试验和计算方法研究
7.
Study on Correction of the Settlement of the Subbed Soil Considering the Lateral Deformation and Its Engineering Application;
考虑侧向变形的地基沉降修正研究及其工程应用
8.
In-situ Test and Study on Influence of Surroundings around Foundation Pit Owing to Lateral Displacement of Soil Nailing Support;
土钉支护结构的侧向变形对基坑周边环境影响的试验研究
9.
A Study of the Lateral Deformation Effect on the Road Bed and Adjacent Piles & Soil Due to the Road Embankment Heaped Load;
路堤堆载引起路基及邻近桩土侧向变形效应研究
10.
Slurry pressurized effect on strength and deformation characteristics of clay soil at excavation face in slurry shield
黏性土层中泥水盾构泥浆作用对开挖面土体强度和侧向变形特性影响研究
11.
Liquefaction-induced Lateral Spreading of Soil Layer Under Two Mechanisms;
液化土层两种机制下侧向大变形分析
12.
Studies on Bearing and Deformation Mechanism and Shaft Resistance Degradation of Super-long Piles under Vertical Loading;
竖向受荷超长桩承载变形机理与侧阻软化研究
13.
Analysis of lateral deflection of prestressed I-|girder in the prestressing;
预应力工型梁张拉过程中的侧向弯曲变形分析
14.
Deformation characteristics of the soil around the foundation pit with lateral unloading
基坑土体侧向卸荷条件下的变形性状研究
15.
Measurement of the lateral strain can be accomplished using a lateral extensometer.
侧向应变可用侧向引伸仪来测量。
16.
side fire helical antenna
侧向辐射式螺旋形天线
17.
Large deformation bands were observed at each side of the crack.
实验结果表明：在裂尖两侧存在与裂纹方向夹角约为50°大变形带。
18.
Bending deformation：The component bends in one side after welding.
弯曲变形：构件焊后朝一侧弯曲的变形。