1.
Design of an Automatic Dividing Punch Mould for Spokes on Wheel Cranes
轮式起重机轮辐自动分度冲孔模设计
2.
Design of piercing-blanking progressive die based on Pro/E-PDX
基于Pro/E-PDX的冲孔、落料连续模设计
3.
Calculative methods for the complicated draw-hole sizes in the design of dies;
冷冲模设计中的复杂抽孔尺寸的计算方法
4.
A new thinking for the design and manufacture of16 J spoke piercing blanking die is introduced.
介绍了16J轮辐冲孔、料模的设计及制造新思路。
5.
Design of blanking and punching compound mould about the high speed marine carburetor
高速船用化油器落料冲孔复合模具设计
6.
Design of Side Hold Punching Die for the Fixed Frame in Automobile Steering System
汽车转向系统中固定架冲侧孔模具设计
7.
Design of Polishing Fixture for the Piercing Punch by TD Vanadizing Treatment
冲孔凸模TD渗钒处理前后抛光工装结构设计
8.
Stamp High-Density Eyelets on Stainless Thin Steel Plate and Optimize Mold Design;
不锈钢薄板高密度小孔冲压加工及模具优化设计
9.
Design and Realization of Double-headed Perforator’s Control System Based on PLC
双头冲孔机PLC控制系统的设计与实现
10.
A new technology design of Automatically Continuous Punching &Extruding Four-Hole Forming on Bend Sidebar of Chain
链条弯链板自动连续冲挤4孔成形新工艺设计
11.
The Design of the Cushioning Packaging Saved-hole Based on ANSYS/LS-DYNA
基于ANSYS/LS-DYNA对缓冲包装省料孔的巧妙设计
12.
Supporting the use of impact drilling electric drill. Drilling, hole spacing with hole depth should meet the design requirements.
(1)钻孔使用配套冲击电钻.钻孔时,孔洞间距与孔洞深度应满足设计要求.
13.
The extrusion and piercing die was developed based on the technical analysis on the shaping characteristics of deep taper pipe with hole.
针对带孔深锥形管件的成形特点进行了工艺分析,确定了成形方案,设计了锥形管挤压模和冲孔模。
14.
Models to Estimate the Productivity of Horizontal Wells and Their Application to Optimization Designs on Segmented Perforations;
射孔水平井产能模型及分段射孔优化设计
15.
Variant Design of Dies CAD System Based on Assembly Model;
基于装配模型的冲模CAD系统变形设计
16.
On teaching mode of cold forming process and mode design
“冷冲压工艺与模具设计”教学模式探讨
17.
Optimized Pass Design System of Angle Steel and Finite Element Simulation;
角钢孔型优化设计系统及有限元模拟
18.
The Pass Design and Stady Simulation System for C Beam Hot Rolling
热轧C型钢的孔型设计及有限元模拟