1.
Study on the Slot Effect of Permanent Magnet Synchronous Linear Motors
永磁同步直线电机分数槽绕组谐波分析和齿槽力研究
2.
spline shaft
多槽[有齿, 花键]轴
3.
Comparison of a fixed fixed bridge with casting clasp retained nonextention removable partial denture
非游离端可摘义齿与固定义齿牙槽骨承力的变形分析
4.
SHEAR CAPACITY OF VERTICAL-GROOVED CONNECTION IN PBP STRUCTURES
装配式大板结构竖向齿槽接缝受剪承载力设计
5.
Approach to calibrating and compensating cogging force ripple in linear motors
直线电机齿槽推力波动的标定与补偿方法
6.
The cut mechanical model of pick-shaped cutter under conditions of dissymmetrical slotting
基于截槽非对称条件镐形截齿的截割力学模型
7.
Force behavior research on new Dry-Alveolus-Connection of precast reinforced concrete frame column
新型预制混凝土干式齿槽连接框架柱受力性能
8.
A small dent or nick, as in the body of a car.
小齿，槽口小齿或槽口，如在汽车车体中
9.
However, their cogging torque or unbalanced radial force is usually high, deteriorating the machine performance.
但是这种电机的齿槽定位转矩或不对称径向力一般也比较高。
10.
Biomechanical Experimental Research on the Compression Plate of Gear Contact Plate-band and Channel Type for Femoral Fractures;
齿接触板-带式槽形加压钢板固定股骨骨折的生物力学实验研究
11.
Research on Cogging Torque Ripple Compensation at Low Speed for Direct Drive Ring Permanent Magnet Torque Motor
直接驱动环形永磁力矩电机低速齿槽转矩脉动补偿研究
12.
pronounce with a flap, of alveolar sounds.
发齿槽音时用节拍发出。
13.
Make sure that the film stays within the film guides, and that the upper sprocket edge is under the guide plate.
要保证胶片嵌入胶片槽,且上齿边缘在槽板下。
14.
Three-dimensional Finite Element Analysis of Stress Distribution and Displacement of Edentulous Alveolar Ridge Retained by Conical Telescope;
不同材料套筒冠义齿无牙区牙槽嵴应力、位移分布的三维有限元分析
15.
Reducing the Cogging Torque in Permanent Magnet Machines by Introducing Auxiliary Slot in the Top of Stator Teeth
定子齿顶开辅助槽削弱永磁电机齿槽转矩的方法
16.
The belts have teeth, or slotted spaces to engage and drive teeth on gear wheels.
皮带上有齿，或者槽以啮合并且驱动传动齿轮上的齿。
17.
a condition in which a tooth is so crowded in its socket that it cannot erupt normally.
牙齿被挤压在牙槽内不能生长的状态。
18.
Excessive amount of grease applied to the input shaft splines.
涂抹过量黄油于输入轴齿槽中。