1.
The box corner welds were made with E70 electrodes.
箱型梁内角部焊缝所用的电焊条为E70。
2.
Structure design and finite element analysis for a large-span girder
大跨度箱型梁结构设计与有限元分析
3.
Construction Technology of Prefabricated High Performance Concrete Box Girder
高性能混凝土预制箱型梁的施工技术
4.
This bridge was built with precast channel girder sections, but could be built with AASHTOI girders or box sections.
该桥是采用预制的槽型梁修建的，但是也可利用AASHTOI的标准工型梁或箱型梁修建。
5.
During fabrication slots for the stringers flanges were flame cut into box girders.
制造时，为安装纵梁翼缘，在箱型梁中用焰割法开槽口。
6.
Study on Ultimate Strength and Damage Resistance Performance of Ship with Longitudinal Box Girders;
纵向箱型梁船体结构极限强度和抗损性能研究
7.
Investigation on Static and Dynamic Characteristics of Pre-stressed Box-girder;
预应力箱型梁的静力特性与动力特性研究
8.
The Analysis of Distortion、Shear-Lag Effect and Reliability for Thin-Walled Box Girders;
薄壁箱型梁的畸变、剪力滞效应及其可靠性分析
9.
The Finite Element Method of Bridge Continuous Box Girder Beam and T Tepth Beam;
箱梁、T型断面梁的空间板有限元解法
10.
Analysis of Grillage Method for Two-span 24-m Continuous Multi-chamber Irregular Box Girder Bridge
两跨24m连续多室异型箱梁桥梁格法分析
11.
Analysis for Prestressing of Curved Continuous Box Girder Bridges
箱型截面曲线连续梁桥的预应力分析
12.
3D Aerodynamic Admittance Research of Streamlined Box Bridge Decks;
流线箱型桥梁断面三维气动导纳研究
13.
Secondary Development for GUI of Box Girder Bridge Based on ABAQUS
ABAQUS箱型桥梁的GUI二次开发
14.
Box-type Walking Beam Finite Element Analysis Based on PRO/E
基于PRO/E的箱型步进梁有限元分析
15.
Construction of fish-bellied large volume continuous box girder groove
大体积鱼腹式槽型连续箱梁施工技术
16.
Temperature Field Analysis for the Prestessed Concrete Box Girder
预应力混凝土箱型轨道梁温度场分析
17.
CFD wind loading analysis on twin-girder-structured cranes
典型起重机双箱梁结构的CFD风载研究
18.
FLEXURAL BEHAVIOR OF FRP PROFILE ASSEMBLED BOX BEAM
FRP型材拼装箱梁的受力性能研究