1.
Research on the Out-Of-Plane Effective Length Factor of Brace in SHS Truss Using Gapped K-Joint;
间隙K型节点方管桁架支杆平面外计算长度系数研究
2.
Experimental Research on Static Behavior of SHS Truss with Gapped K-Joints;
间隙K型节点方管桁架静力工作性能的试验研究
3.
Research on Strength of Welds in Overlaped RHS K(N)-joints;
矩形管K（N）型搭接节点焊缝计算研究
4.
Research on Static Behaviour of Unstiffened Overlapped Circular Hollow Section K-Joints;
平面K型圆钢管搭接节点静力性能研究
5.
The Nonlinear Analysis on the Steel Tubular Lap K-joint Ultimate Bearing Capacity;
K型钢管搭接节点极限承载力的非线性分析
6.
The Limit Bearing Capacity for Gap K-Joints of Steel Lipped Channels Trusses;
卷边槽钢桁架K型间隙节点的极限承载力
7.
Nonlinear Finite Element Analysis of Overlap Tubular K-Joints Made of Square Chord and Circular Braces
K型方圆钢管搭接相贯节点非线性有限元分析
8.
Study on stress concentration factors of K-joints under axial loads
轴向荷载作用下K型管节点应力集中系数研究
9.
Parametric Study and Design of the Ultimate Strength of Tube-gusset Plate Connections
K型钢管—板节点受力性能与承载力计算方法
10.
Research on the Bending Rigidity and Gusset Plates Stability of Tube-gusset K-joints
平面K型管板节点抗弯刚度及节点板稳定承载力研究
11.
The Analysis on the Rigidity of Rotation for Y-and K-circular Tubular Joints;
Y型和K型相贯节点圆钢管的转动刚度性能研究
12.
Finite Element Analysis on Static Behavior of Directly Welded K-Type and KK-Type Chs-Joints
直接焊接K型、KK型圆钢管节点静力性能的有限元分析
13.
Experimental Sutdaies on Reinforced Circular Tubular s Ultimate Capacity;
加强K型圆钢管相贯节点的极限承载力试验研究
14.
Parametric Analysis and Design of the Ultimate Strength of Tube-gusset Plate Connections
K型钢管—板连接节点受力性能与极限承载力研究
15.
EXPERIMENTAL STUDY OF STRESS CONCENTRATION FACTOR FOR COMPLETELY OVERLAPPED K-JOINTS
完全叠接K型管节点的应力集中系数的试验研究
16.
Nonlinear finite element analysis of72 overlap tubular K-joints and18 zero-gap K-joints is carried out.
对72个K型圆钢管搭接节点和18个零间隙节点进行了非线性有限元分析。
17.
The Pointwise Approximation Theorems for the Meyer-K(?)nig-Zeller Type Operators;
关于Meyer-K（?）nig-Zeller型算子的点态逼近性质
18.
Experimental study on ultimate bearing capacity of CFST directly-welded K-joints
钢管混凝土K形相贯节点极限承载力试验研究