1.
Experiment results show that flow calculated by discretizated formula for the flow in cone-shaped microchannel is more precise.
实验结果表明：采用变锥度角公式计算流量比等锥度角公式计算流量更接近于实验流量。
2.
Series of conical tapers and taper angles
GB/T157-1989锥度与锥角系列
3.
equal spiral angle taper cylindrical milling cutter
等螺旋角锥度柱铣刀
4.
Design of Embedded High Precision Cone Angle Measuring Device
嵌入式高精度锥度(角)测量仪的研制
5.
Study on Interpolation Algorithm of Angle Approach about Taper Curve
圆锥曲线的角度逼近插补方法研究
6.
The Effects of Angle Windage on the Linking Intensity of Interference Fits;
圆锥母线角度偏差对过盈联接强度的影响
7.
Analysis of Conical Twist Drill Chisel Edge Profile and Angles
锥面麻花钻横刃廓形及其几何角度分析
8.
Combined Standard Appliance With Arc Formation Angle Block Used to Check Taper Raceway
检验圆锥滚道用弧形角度块组合标准器
9.
Analysis on Working Angle of Scraping Cutter for Bevel Gear with Circular Arc Teeth
弧齿锥齿轮刮削刀盘工作角度的分析(上)
10.
Not greatly complicated really; just remember that that the cone's inner and outer angles are specified in radians not degrees.
并不是很复杂。只要记好锥形的内外角是用弧度而不是角度表示的。
11.
Effect of incident laser beam angle varying on cube corner retro-reflector measurement accuracty
激光光束入射角度变化对角锥棱镜测量精度的影响
12.
increment angle
(圆锥齿轮)齿端角
13.
Angle masters with various angles, prisms, corner cubes and lage aperture and high precision cemented plate.
不同角度的标准角块、棱镜、角反射器（角锥棱镜）及大口径、高精度的光胶板。
14.
A structure or part suggestive of a pyramid in shape.
角锥性器官形状象角锥的结构和部分
15.
a curve that lies on the surface of a cylinder or cone and cuts the element at a constant angle.
位于圆柱体或圆锥体表面上且以不变的角度相交于元件的曲线。
16.
Theoretical Analysis on Polymer Melt Extrusion Swell at Conical Die with Different Entrance Angles
不同角度圆锥口模对聚合物熔体挤出胀大的影响
17.
Small diameter and little awl corner hydrocyclone has better separate, lower work capacity, large pressure drop and diffluence ratio.
小直径小锥角水力旋流器分离粒度小、处理量小、压降大、分流比大;
18.
Influence of Face Coning and Static Stator Angular Misalignment on Dynamic Behavior of Gas Film of Slow Speed Dry Gas Seal
锥度及静态静环角偏差对低速干气密封气膜动态特性的影响