1.
Circuit Balancing Valves may be packaged with the balance of the NIBCO Commercial/Mechanical Valve line.
流量平衡阀可被用于平衡美国尼伯科的商用/机械式阀门管道。
2.
To block off or obstruct(a pipe or valve, for example.
阻塞（如管道或阀门）
3.
squib-actuated valve
电导火管启动的阀门
4.
Exposition & key points of implement for API 6D (pipeline valves,twenty-third edition)
API6D管道阀门(第23版)解读
5.
The valves can used for pipe nozzle and have reliable performance.
阀门可用于管端作放空阀用，性能可靠。
6.
Grooved butterfly valves direct connect to pipe using iron pipe size couplings. Grooved valves are easiest to install.
管状蝶阀:采用铸铁管接头直接与管道连接。管状阀门安装最容易。
7.
The gas distribution system shall cover from the gas outlets on the benches or fume hoods to gas regulator manifolds at the cylinder area.
气体管路安装从气瓶站总阀门到工作台上各个气体阀门。
8.
Backseating the valve stops any flame from traveling through the valve and connecting hose into the crankcase.
落座的阀门阻止火焰通过阀门和连接管进入曲轴箱。
9.
CBV angle-style valves are designed to replace piping elbows.
CBV角型阀门可用于取代管道弯头。
10.
Applicable to NIBCO INC. Plumbing and Heating Valves only.
仅适用于美国尼伯科管道与供暖阀门。
11.
Solenoid Switch Valve Latched in TCC Position
电磁螺线管开关阀门固定在ＴＣＣ位置
12.
The Numerical Research on Control Characteristics of Closing Valve in Pressure Pipeline
有压管路中阀门关闭特性的数值研究
13.
Application of CFD Method in Calculation of Water Hammer for Pipe Valve
CFD技术在管道阀门水击计算中的应用
14.
Controlled closing of the valve, opens the mainline check valve, gradually increasing line pressure.
阀门受到控制的关闭操作，开启主管线止回阀，逐渐增加管线压力。
15.
Type of valve- gate, globe, check, etc.
阀门种类：闸阀，截止阀，止回阀，蝶阀，球阀，等等。
16.
HKV mainly produces API forged and cast steel valves, Chinese standards high-medium pressure valves, forged flanges as well as piping assessories.
华凯阀业主要生产API标准锻钢及铸钢阀门、国标高中压阀门、锻钢法兰及管道附件等。
17.
The line pressure required to open the valve is a function of the disc/piston weight and the size of the port diameter.
开启阀门所需要的管道压力取决于阀瓣／活塞的重量和阀门端口直径的综合作用。
18.
Must not be smaller than the pipe size of the relief valve or have any reducing coupling installed in the discharge line.
在安全阀和排泄管之间不要加盖、闭塞、堵塞或包含任何阀门。