1.
Sandberg process
碳钢局部索氏体化处理
2.
It shows that sorbitized treat using water quench replacing lead quench is possible for Carbon steels prestressed wires.
研究表明碳素钢予应力钢丝采用水淬火取代铅浴进行索氏体化处理是可行的。
3.
primary sorbite
初生索氏体, 一次索氏体
4.
Application of Thermo-Calc Software to Optimization of Heat Treatment for Maraging Steel
Thermo-Calc在马氏体时效钢热处理工艺优化中的应用
5.
Brightening Treatment of Austenite Stainless Steel after Plasma Carburizing
奥氏体不锈钢低温离子渗碳后的亮化处理
6.
Study on Brightening Treatment of Austenitic Stainless Steel after Low Temperature Plasma Carburizing
低温离子渗碳奥氏体不锈钢表面亮化处理的研究
7.
Study on Equipment and Process of Plasma Carburizing Surface Hardening of Austenitic Stainless Steel at Low Temperature
奥氏体不锈钢低温离子渗碳表面硬化处理设备及工艺研究
8.
Effect of heat treatment on properties of ASTM S30432 austenitic heat resistant steel
热处理对ASTMS30432奥氏体耐热钢性能的影响
9.
Bainitic microstructure segmentation based on plane geometry
基于平面几何处理的贝氏体组织分割
10.
Heat Treatment Process for 23-8N Austenitic Heat Resistant Steel
23-8N奥氏体耐热钢热处理工艺研究
11.
Heat Treatment Process and Performance Analysis of Martensite TRIP Steel;
马氏体基体TRIP钢的热处理工艺与性能分析
12.
17.4 ph stainless steel -- Is a martensitic precipitation/age hardening stainless steel offering high strength and hardness.
17.4 ph不锈钢--是一种经过沉降凝结／老化硬化处理的马氏体不锈钢,具有很高的硬度。
13.
The Effects of Heat Treatment on Properties of High-Cu Martensite Stainless Steel;
热处理工艺对高铜马氏体不锈钢性能的影响
14.
Influence of Heat Treatment Technology on Structure and Property of Maraging Steel;
热处理工艺对马氏体时效钢组织及性能的影响
15.
Influence of heat treatment on the properties of the heat-resistance martensite stainless steel 0Cr_(17)Ni_4Cu_4Nb;
热处理对耐热马氏体不锈钢0Cr_(17)Ni_4Cu_4Nb性能的影响
16.
Review on the Relation between Heat Treatment and Retained Austenite Formation of Cold Rolled TRIP-aided Steels
冷轧TRIP钢的热处理与残留奥氏体形成的关系
17.
Solution Treatment of the Part of Austenitic Stainless Steel U-pipe
奥氏体不锈钢U形换热管局部固溶处理
18.
Heat treatment and application of W-Al-containing bainitic steel used for crossing
辙叉用含钨铝贝氏体钢的热处理及其应用