1.
A new detecting method for reference signal of APF
一种新的有源滤波器参考信号提取方法
2.
Processing Method for Reference Points of Incremental Encoder Based on Singlechip
一种基于单片机的增量式光栅参考信号处理方法
3.
For testing noninstantaneous signals, this article has equal reference value.
对于非瞬态信号的测试本文有同样的参考价值。
4.
A Simple Method for Constructing Reference Sinusoidal Signal of Direct Computation Method
一种构造直接计算法参考正弦信号的简单方法
5.
For more information, refer to .
更多信息，请参考。
6.
A data terminal equipment( DTE) recognizes a virtual circuit by its associated LCN.
一种标识逻辑信道的唯一参考号,数据终端设备(TE)过其相关的逻辑信道号来识别虚电路。
7.
The crank reference pulse oringinates from a variable reluctant pickup which senses a projection on the engine's flywheel.
曲柄参考点脉冲信号由一个变磁阻传感器产生，它从发动机飞轮上的突起感受信号。
8.
A unique reference number that identifies a logical channel. A data terminal equipment ( DTE ) recognizes a virtual circuit by its associated LCN.
一种标识逻辑信道的唯一参考号,数据终端设备(DTE)通过其相关的逻辑信道号来识别虚电路。
9.
The signal beam can be recreated by illuminating the medium with a beam identical to the original reference beam.
通过用和原始参考光相同的光束来照亮感光介质可以还原信号光。
10.
The reference spectra was the signal obtained by coupling the two fibers with a splice bushing.
参考光谱是通过将两个纤维与一个接合套筒耦合后获得的信号。
11.
Reference information about SQL Server error messages, numbers, and recovery actions.
有关 SQL server 错误消息、编号以及恢复操作的参考信息。
12.
The demodulator receives its reference voltage from the signal-generator voltage supply.
解调器的参考电压由电信号发生器电压电源供给。
13.
The method that reference electric control semaphore quickly examines according to slippery window interation DFT harmonic
基于滑窗迭代DFT的谐波参考电流控制信号快速检测方法
14.
Sources Parameters Estimation Based on Array Signal Processing;
阵列信号处理中信号参数估计的研究
15.
Method for Parameters Estimation of PN Sequence in the Lower SNR DS/SS Signals
低信噪比直扩信号PN序列参数估计
16.
Based on the simulation analysis of plural cracks, the theoretical basis of flaw in screw detected by alternative magnetic flux leakage testing method was established, the detection was decomposed to four phases and the signal characteristics of each stage were essayed.
在参考国内外对相邻缺陷漏磁信号进行仿真分析的基础上，建立了螺纹中缺陷检测的理论基础。
17.
A set of consecutive digit time slots in which the position of each digit time slot can be identified by reference to a frame alignment signal.
一组连续的数字时间片段，每一数字时间片段在组内的位置可参考帧同步信号来标识。
18.
Provides a signal to the PCM corresponding to the battery temperaturRefer to Group 8C, Charging System for additional information.
提供一个与电池温度对应的信号给PCM。关于充电系统的附加资讯，请参考单元8C，充电系统。