1.
The Application of Combined Melt Gold Welding Torch in Lab Teaching of Stomatological Technique and Evaluation of Its Results;
组合式熔金焊枪在口腔工艺专业实验教学中的应用及效果评价
2.
MICROSTRUCTURE AND CORROSION PERFORMANCE OF WELD JOINT OF C4 ALLOY/X60 STEEL FILLED WITH LOW ALLOY STEEL FILLER
低合金钢焊丝焊接C4镍基合金/X60钢熔合区组织与耐蚀性
3.
Microstructure and properties of dissimilar metals TIG welding-brazing joint of aluminum alloy to stainless steel using Al-Si flux-cored wire
铝合金与不锈钢异种金属铝硅药芯焊丝TIG熔钎焊接头组织及性能
4.
eutectic brazing alloy
低共熔点软钎焊合金
5.
Comparison of Microstructure and Properties of FSW and MIG Joint for Aluminum Alloy
铝合金搅拌摩擦焊与熔化极氩弧焊接头组织性能比较
6.
electrode ,of metal carbides, coated or cored with flux, for soldering, brazing or welding
焊条,硬质合金制,外涂或内心装有焊剂,用于软焊,硬焊或熔焊
7.
Microstructure and Mechanical Property of TIG Welded Joints of Titanium Alloy/Stainless Steel;
钛合金/不锈钢TIG熔焊接头微观组织及力学性能分析
8.
Laser Welding-Brazing Process and Microstructure Property of Al/Ti Joint;
Al/Ti异种合金的激光熔钎焊工艺及接头组织性能研究
9.
Effect of laser remelting and tempering on microstructure and properties of flame spray-welded Ni-based alloy coatings
激光重熔及回火对Ni基合金火焰喷焊层组织和性能的影响
10.
Study on the Submerged Arc Welding Consumables for 2.25Cr-1Mo-0.25V Steel and Its Microstructure and Mechanical Properties of the Deposited Metal;
2.25Cr-1Mo-0.25V钢埋弧焊焊材及熔敷金属组织性能研究
11.
Study on Microstructure and Property of Deposited Metal Prepared by Electrode CHR132 and CHR172;
焊条CHR132和CHR172堆焊熔敷金属组织及性能研究
12.
Study on Fusion Welding Technique to Dissimilar Alloys of Magnesium Alloy and Aluminum Alloy;
异种金属镁合金和铝合金熔焊工艺研究
13.
Study on Welding Process of Non-Consumable Gas Shielded Arc Welding for Magnesium Alloys AZ31B
AZ31B镁合金非熔化极气体保护焊工艺
14.
Characteristic of Molten Pool During Laser Welding of TA15
YAG激光焊接钛合金TA15熔池特征
15.
Investigation on Solidification Cracking Susceptibility of 690 Nickel-based Welding Strip Surfacing Metal;
690镍基合金焊带熔敷金属结晶裂纹敏感性研究
16.
Cerium Oxide Influence upon Low Alloy Steel Electrode Deposited Metal
氧化铈对低合金钢焊条熔敷金属的影响
17.
Effect of Ti content on microstructure toughness of deposited metal with flux cored wire
钛对气保护药芯焊丝熔敷金属组织韧性的影响
18.
Fusion-brazing Joining for Dissimilar Metals Between 5A02 Aluminium Alloy and Zinc-coated Steel Based on Laser-MIG Hybrid Welding
基于激光——MIG复合热源的5A02铝合金/镀锌钢熔——钎焊