1.
Study on Push-over Analysis Method Based on Lateral Displacement Loading Pattern
静力弹塑性分析方法基于水平位移加载模式的研究
2.
Lateral Load Pattern and Target Displacement of Static Pushover Procedure-Research and Application;
静力弹塑性方法的水平加载模式和目标位移的研究与应用
3.
The rigid retanining wall horizontal displacement calculation according to horizontal moving mode
基于平动模式的刚性挡墙水平位移计算
4.
The Research on Manufacturing Point Displacement Calculation of NC Precision Table Under the Horizontal Load;
数控精密工作台水平载荷作用下加工点位移计算的研究
5.
Study on Failure Models of Great Water Fluctuation Frame Vertical Wharf under Horizontal Bearing Capacity;
大水位差架空直立式框架码头结构水平承载破坏模式研究
6.
At each load increment, an iterative method is adopted to predict the displacement.
在每一载荷水平上，采用迭代法预测位移的变化。
7.
A practical calculation model and approach for along-wind displacement responses of lattice towers
格构塔架顺风位移响应实用计算模型与求解内力位移加载法
8.
Monitoring horizontal displacements of support structure for a complicated planar foundation pit and its reinforcement
某复杂平面基坑支护结构水平位移监测及加固
9.
In this paper, the additional moment due to horizontal displacement practical calculation formula is derived.
本文从理论上推导出拱形钢管出平面的水平位移及由此引起的附加力矩的实用计算公式。
10.
Application of Exponential Smoothing Model in Pit Horizontal Displacement Prediction
指数平滑模型在基坑水平位移预测中的应用
11.
Study on deforming mode of staggered truss system under horizontal loading
水平荷载作用下交错桁架体系变形模式研究
12.
Calculation of internal forces and drift of staggered truss under lateral loads considering torsion
水平荷载作用下考虑扭转效应的交错桁架内力和位移计算
13.
THE HORIZONTAL DISPLACEMENT OF UNDERGROUND CIRCULAR CONTINUOUS WALL STRUCTURE
地下圆形连续墙支护结构的水平位移公式
14.
Failure modes of stiffened plates subjected to underwater explosion
水下爆炸载荷作用下加筋板的毁伤模式
15.
MODEL TEST ON DISPLACEMENT FIELD OF DOUBLE-ROUTE METRO CONSTRUCTED WITH HORIZONTAL FREEZING METHOD
地铁双线隧道水平冻结位移场的模型试验
16.
Analysis on Level Displacement Changes and Study on Safety Monitoring Model of Lijiaxia Arch Dam
李家峡拱坝水平位移监测资料模型分析
17.
Jaw trajectory design for displacement-controlled profile 2D stretch-wrap bending and part program generation
基于位移控制的型材2D张臂式拉弯加载轨迹设计及数控代码生成
18.
STUDY OF ZERO-DRIFT MATH.MODEL FOR LIQUID SUSPENSION PENDULUM ACCELEROMETER
液浮摆式加速度计零位漂移数学模型的研究