1.
Study on acoustic detection of stator slot wedges in large generators
大型发电机定子槽楔松动的声检测研究
2.
A detecting system of stator wedges in large generator based on DSP
基于DSP的大型发电机槽楔松动检测系统
3.
The loosening and dropping out of slot wedges may damage insulation of rotor and stator to cause stator insulation breakthrough.
槽楔松动脱落可能划伤转子绝缘和定子绝缘,造成定子线棒主绝缘击穿。
4.
Application of Magnetic Slot Wedge in Y2 Series High Voltage Asynchronous Motor
磁性槽楔在Y2系列高压电动机中的应用
5.
The surface of inclined wedge pushes the triangle side of the waste and makes the plate move ahead, thus meeting the requirement of position setting and feeding the plate automatically.
斜楔插板上的斜楔面推动废边的三角槽一侧，使板料向前运动，达到板料定位和自动送料的目的。
6.
Study on Effect of Symmetry of Wedge-shaped Cutting Hole Angle on Cut Blasting
楔形掏槽炮孔角度对称性对掏槽效果影响研究
7.
Thin taper keys and their corresponding keyways
GB/T16922-1997薄型楔键及其键槽
8.
Taper keys--Cross section dimensions of keys and keyways
GB/T1563-1979楔键键和键槽的剖面尺寸
9.
Study on the Failed Mechanism and Experiment of Spiral Notch-holes Blasting;
螺旋切槽孔松动爆破力学机理及试验研究
10.
A wedge or key that fits into a groove to make a joint.
加强肋作为连接物填入槽内的楔形物或舌状物
11.
Preliminary Study on Forming Laws of Cuspidal Splitter Split-extruding Rectangular Slot
尖头劈楔劈挤矩形槽成形规律初步研究
12.
Elasto-plastic Analysis of the Rotor and Wedges of 1000MW Supercritical Turbogenerator
超临界1000MW汽轮发电机转子和槽楔的弹塑性分析
13.
Development of Pultruded Magnetic Slot Wedge Based on Glass Fibre Reinforced Unsaturated Polyester Resin
玻璃纤维增强聚酯树脂引拔磁性槽楔的研制
14.
Generator Stator Wedge Replacement and Analysis of Core Corona Corrosion Treatment
发电机定子槽楔更换及铁芯电晕腐蚀处理浅析
15.
Popularization and Application of Deep-hole Blasting Technique in Bottom Compound-term Wedge Cutting
底部复式楔形掏槽中深孔爆破技术的推广应用
16.
Design of Combination of Smooth Blasting and Double-wedge Cut for Roadway Excavation
双楔形掏槽方法和光面爆破技术的综合设计
17.
The loosening holes outside the plough cut are also drilled at an angle which improves the breakage possibility.
在楔形掏槽眼外侧的扩槽眼也要有角度以改善爆破效果。
18.
The Norwegian cut can provide more dependable advance per round than the plough cut.
挪威掏槽与楔形掏槽相比，可以提供更可靠的每次爆破的进度。