1.
Subsonic Multi-point Design of A Reflex Foil Based on Genetic Algorithm
基于遗传算法的负弯度翼型亚音速多点设计
2.
camber changing flap
改变机翼弯度的襟翼
3.
For straight-winged tailless airplanes, only the negative camber satisfies the conditions for flight.
对直机翼无尾飞机，只有负弯度才满足飞行条件。
4.
Effect of Aerofoil Camber on Airfoil Aerodynamic Performance
风力机的翼型弯度对风力机翼型气动性能的影响
5.
Influence of chordwise bending stiffness on aeroelastic characteristics of flexible high-aspect-ratio wing
水平弯曲刚度对大展弦比机翼颤振的影响
6.
Behaviors of two new kinds of cold-formed flange-closed composite section members under axial compression
新型冷弯翼缘闭合组合构件轴压力学性能
7.
However, the stud welding roots in the negative moment region of the beam are often subjected to the joint action of shear stress cycling of the studs and tensile stress cycling of steel girder flanges.
但在负弯矩处栓钉焊趾往往承受栓钉剪应力循环和钢梁翼缘拉应力循环的共同作用。
8.
Bending behaviors of functionally gradient piezoelectric curved cantilever was studied.
研究了弯曲型梯度功能压电悬臂梁的弯曲特性。
9.
Flexural Behaviour and Strength of Cold-Formed Steel L-Headers
冷弯L型钢联箱的弯曲性能和强度研究
10.
Loading Capacity of Composite Box Girder Intersection with Special-Shaped Steel and Concrete in Negative Bending Region
负弯矩区异型钢-混凝土组合岔梁受力性能分析
11.
Theoretical Model of the Large-Scale Eddy Structures in the Near Wake Region Behind an Airfoil
翼型近尾迹流中大尺度涡结构的理论模型
12.
"King's Indian, Fianchetto without c4"
王翼印度,侧翼象无c4
13.
A variant of the swept-back wing is the delta wing.
后掠翼的变型是三角翼。
14.
Select a typical bend angle from the list, or type in a custom one.
从列表中选择一个典型弯度，或输入一个自定义的弯度。
15.
Road with one degree of curvature. Road width and type are configurable.
度弯曲道路。可配置路宽和类型。
16.
EXPERIMENTAL STUDY ON THE FLEXURAL STRENGTH OF FINE GRAIN ETHANOL MODEL ICE
细粒酒精模型冰的弯曲强度试验研究
17.
Study on Springback Prediction of High Strength Strip Steel in Rollforming;
高强度带钢辊弯成型的回弹预测研究
18.
Test method of heat deflection temperature underbending load for plastics
GB/T1634-1979塑料弯曲负载热变形温度(简称热变形温度)试验方法