1.
Dynamics numerical analysis of space deployable mechanism with three-dimensional clearance revolute joint
含三维间隙铰空间可展机构动力学数值分析
2.
Dynamics simulation of deployment for solar panels with hinge clearance
含铰间间隙太阳帆板展开动力学仿真
3.
Research on 3D Molding and Meshing Clearance of Conical Twin-Screw
锥双螺杆的三维建模与啮合间隙研究
4.
Analysis of deployment of spacecraft appendages with hinge gap
含铰间间隙的航天器附件展开过程分析
5.
Dynamic Simulation and Modeling of Planar Revolute Joint with Clearance Based on Virtual Prototyping
基于虚拟样机技术的含间隙转动铰建模方法
6.
An Three-dimentianal Numerical Turbulent Flow Simulstion for Rim Clearance of Kaplan Turbine
轴流式水轮机轮缘间隙三维紊流数值模拟
7.
Effect of Normal Gap Distribution of 2-dimension and 3-dimension on Cathode Design of Turbine Blade in ECM
叶片电解加工中二维/三维法向间隙分布对阴极设计的影响
8.
Dynamics Simulation of A Crank-Slider Mechanism With A Clearance-Joint by Virtual Prototype;
基于虚拟样机技术的含间隙铰曲柄滑块机构动力学仿真研究
9.
Wind-induced lateral vibration of a 7500t floating crane's boom considering axial clearance between boom and pin hinge
7500t浮吊臂架考虑铰支座间隙的风致横向振动研究
10.
Dynamic Simulation and Modeling of Revolute Clearance Joint for Virtual Prototyping
面向虚拟样机的机构间隙旋转铰建模与动力学仿真
11.
Three-dimensional finite element analysis of two anchorage types in closing the space following tooth extraction in maxilla
三维有限元方法比较二种支抗形式关闭上颌拔牙间隙
12.
Analysis of Joints Clearance s Influence on Dynamic Performance of Mechanism and Analysis of Dynamic Response of a Space Deployable Mechanism;
铰链间隙对机构动态性能影响分析与某空间展开机构结构动力学响应分析
13.
Position hinge plates, shims and replacement hinge-half on door face.
在车身表面定位铰链护板，填隙片和半铰链。
14.
3D Imaging and Visualization Technology of Micro Pore Structure in Porous Media
多孔介质微观孔隙结构三维成像技术
15.
3-D Numerical Analysis of Navigation Lock Structure on Composite Foundation with Rigid Pile;
刚性桩复合地基上双铰底板式闸室的三维数值分析
16.
Local Buckling Check According to Eurocode-3 for Plastic-Hinge Analysis of 3-D Steel Frames
基于欧洲规范3中三维钢框架塑性铰分析的局部屈曲检验
17.
Valve Tappet Adjustment For Three And Five--Cylinder Engines
三缸与五缸内燃机气门间隙调整方法
18.
Research on Gap of Roll-die of Pellets Plane-die Press
三锥辊式平模制粒机模辊间隙的探讨