1.
Radial Distribution of Internal Longitudinal Residual Strain in Eucalyptus urophylla×E. grandis Plantation Log
人工林尾巨桉原木内部轴向残余应变径向分布
2.
Analysis on Axial Thermal Residual Stress of Metal Matrix Composites Reinforced by Fiber
纤维增强金属基复合材料中轴向热残余应力分析
3.
Test and Research on Nondestructive Measurement of Residual Stress Distribution in Bogies with the Magnetic Elastic Method
磁弹性法无损测试转向架残余应力分布的试验研究
4.
Characteristics of droplet size distribution downstream of coaxial twin-fluid atomizer
同轴双通道喷嘴雾化滴径沿轴向分布特性
5.
Axial and radial profiles of hydrodynamic parameters of external-loop airlift reactor
气升式外环流反应器流体力学参数的轴径向分布
6.
radial bearing upper drive sub
上部径向轴承传动接头
7.
radial bearing lower drive sub
下部径向轴承传动接头
8.
The influence of rotational speed and axial location(six locations) was summarized.
研究了不同转速下不同轴向位置（6个轴向位置）时旋转盘腔内部流场的分布规律。
9.
Analyzing Rotor Rotating Error Using Fractional Brownian Motion
基于分数布朗运动的转轴径向回转误差分析
10.
Performance of new structure inner restrictor compensated hydrody- namic/ hydrostatic journal bearings
新型内部节流形式动静压径向轴承特性研究
11.
Research on the Distribution of the Cold-formed Stresses and the Overall Stability of the Axially Compression Members in the Effect of Residual Stresses;
冷弯残余应力分布及其影响下的轴压构件整体稳定性研究
12.
The pressure distribution was simulated with a approximate method.
采用近似方法模拟径向滑动轴承压力场分布。
13.
Research of Transverse Stress Reduction in Prestretching of Aluminum Alloy Thick Plate
铝合金厚板拉伸过程横向残余应力消减分析
14.
The in_ cavity residual stress in first principal direction result shows the forces left in the part after ejection in the orientation direction.
第一方向残余应力?品顶出时在配向方向上的残余在产品中的力。
15.
axial power distribution monitoring system
轴向功率分布监测系统
16.
Measuring and Analyzing the Residual Stress of the Principal Axis Bearing Racks of 1.5 MW Wind Power
1.5MW风机主轴轴承架残余应力的测量及分析
17.
Selection and fit of compound clearance of angular contact ball bearing with double inner rings
双内圈角接触球轴承轴向和径向游隙的选配
18.
Numerical Analysis of Dynamic Response and Axial Stress Distribution of Rock Bolts Under Explosive Loads
锚杆动载响应和轴向应力分布规律数值分析