1.
The research of modeling of blank holding groove in mechanical press craft based on ACIS-HOOPS
以ACIS与HOOPS为平台的冷冲压压边条建模技术研究
2.
Piping Foot: for finishing bias binding strips.
滚边压脚：用来将斜布条滚边成带。
3.
What is the potential drop in an edge?
在一条边中电压降是多少？
4.
Boundary parameters during glass lubricated hot extrusion of steel pipes
钢管玻璃润滑热挤压工艺的边界条件
5.
The voltage induced in the terms of the armature winding is alternating.
在电枢绕组的各条边所感应的电压是交变的。
6.
Effects of Combustion Boundaries on Ethanol Fueled Homogeneous Charge Compression Ignition Combustion;
燃烧边界条件对乙醇燃料均质压燃的影响规律
7.
Bounding Surface Model for Concrete in Triaxial Compression;
混凝土三轴受压条件下边界面模型的研究
8.
Experimental Study on HCCI Engine Combustion Boundaries Condition;
均质压燃发动机燃烧边界条件的试验研究
9.
Shakedown Analysis of Slopes Subjected to Variable Pore-Water Pressure;
交变孔隙水压条件下边坡的安定性研究
10.
Study on Alcohol Hccl Combustion Boundary Conditions;
乙醇均质压燃燃烧边界条件的试验研究
11.
An Implicit Scheme for Incompressible LBGK Model and Analysis on Complex Boundary Processing;
隐格式的不可压LBGK模型及复杂边界条件分析
12.
Numerical Analysis for Dynamic Response of Cracked Slope under Hydraulic Pressure
水压力条件下的含裂隙边坡动力响应数值分析
13.
Bending of thick rectangular plates with adjacent simply supported,one fixed and one free edges under hydrostatic pressure
静水压力作用下复合边界条件厚矩形板的弯曲
14.
a narrow strip of wood used to fasten down the edges of the material that covers hatches in foul weather.
压板条:一种用来固定在恶劣天气下遮盖船舱口材料边缘的窄木条。
15.
Numerical Solution of Slip Line Field and Its BoundaryConditions for Compressible Material in Plane Strain
可压缩材料平面应变滑移线场的数值解和边界条件
16.
Establishment of Repeating Stage Conditions for Prediction of Axial Compressor Flow Field
轴流压气机重复级边界条件的建立及其在流场数值诊断中的应用
17.
Mechanical Model and Boundary Condition From the Edge Joint of Giant Transformer Fuel Tank
大型变压器油箱箱沿力学模型和边界条件模拟的研究
18.
The Static Analysis of Functionally Graded Piezoelectric Rectangular Plates under Various Boundary Conditions;
不同边界条件功能梯度压电矩形板的静力问题研究