1.
Study on large ingot positive rolling process of 2A12 aluminum alloy plates
2A12铝合金板材大铸锭顺向轧制工艺研究
2.
SUMMARIZE ABOUT SEQUENCE CONTROL AT FURNACE OF AISC 1700 HOT STRIP MILL PLANT
鞍钢1700热连轧炉区顺序控制概述
3.
Study on Rolling Stability of Silicon Steel in Hot Continuous Rolling
提高热连轧无取向硅钢轧制稳定性研究
4.
Seamless φ159MPM Limits Moves the Company to Roll over the Unit Yummy Treats Rotor Arm Sequential Control System
无缝φ159MPM限动连轧机组下料旋转臂顺序控制系统
5.
After cold-rolling of sheet, the basal plane slopes to rolling direction, improving the ductility in this direction.
冷轧后的基面向轧制方向倾斜使该方向的塑性指标得到改善。
6.
Calculation of Transversal Slab Thickness During Plate Rolling
中厚板轧制过程横向厚度的计算方法
7.
Commercial Trial Production of Cold Rolled Oriented Electrical Steel Strip 27Q130
27Q130冷轧取向电工钢带的工业试制
8.
CNC control system for large scale NC radial-axial ring rolling mill
大型径轴向数控轧环机电气控制系统
9.
Effect of Roll Gap Geometry and Rolling Temperatures on the Evolution of Deformation Textures and Microstructure in Rolled Non-oriented Silicon Steel
轧制几何和温度因素对无取向硅钢轧制形变织构及组织的影响
10.
Thickness control for rolling process by sensitivity based on support vector machine
基于支持向量机灵敏度的轧制过程厚度控制
11.
On Deformation Laws and CAPP System for Radial-axial Ring Rolling;
环件径轴向轧制变形规律与CAPP系统研究
12.
Research on Technology of Twin Symmetry Roll Axial Rolling Spiral Bevel Gear;
对称双辊轴向轧制螺旋锥齿轮工艺研究
13.
Effect of Clock Rolling on Microstructures and Properties for AZ31 Magnesium Alloy Sheets
多向轧制对AZ31镁合金板材组织与性能的影响
14.
New Hot-Rolled Dual-Phase Steel Used for Carwheel
新型轿车车轮用热轧双相向钢(F+M)的研制
15.
New Technology of Twin Symmetry Roll Axial Rolling Passive Spiral Bevel Gears
对称双辊轴向轧制从动螺旋锥齿轮新工艺
16.
Rolling force prediction based on chaotic optimized support vector machine
基于混沌优化支持向量机的轧制力预测
17.
close continuous mill
多机轧制的连续式轧机
18.
Improvement of Rolling Profile Shape of R0 Roughing Mill with Permanent Rigidity Rolling
恒刚度轧制改善R0粗轧机的轧制板形