1.
Design of No-compressed Sealing Tools Used in Pressure Test for Single Tube
换热管单根试压用无压紧密封工装设计
2.
The Thermal Stress Analysis on High Pressure SelfTight Seal Device with Shear Bolts
抗剪螺栓高压自紧密封装置的温差应力分析
3.
New Type of High Pressure Quick-open Self-tight Seal Structures Used in Supercritical Extraction Equipment
超临界萃取装置新型高压快开自紧密封结构
4.
The containers loaded with the dough are hermetically closed.
装药团的容器应紧密密封。
5.
The Improvement of Seal Steel Ball Press Process for Cylinder Head of Engine
发动机缸盖油道密封钢球压装工艺的改进
6.
tighten up
密封, 拉紧, 拧紧
7.
Compound Surface Processing Craft Research on Lubrication without Oil or High Pressure Moving Seal Part
无油润滑、高压动密封件复合表面处理工艺研究
8.
Check whether the packing materials is compacted, should guarantee the sealing of the packing materials without hindering normal work of push rod.
检查填料是否压紧，应保证填料密封性，但又不妨碍推杆的正常工作。
9.
Installer, Seal—C-3995-A
装置工具，密封—C-3995-A
10.
Press the flange and replace the side sealing ring.
压紧法兰（均匀用力）更换侧密封圈。
11.
Cryptographic Workflow Key Encapsulation Mechanism Based on Signcryption
基于签密的密码工作流密钥封装机制
12.
wireline pressure setting assembly
电缆工具压力坐封装置
13.
Requirements: Valve must be tight against reverse flow under all pressure differentials.
要求：在所有压差下，阀门对于回流必须密封紧密。
14.
a small chamber in which packing is compressed around a shaft to form a seal.
通过轴压缩包装来形成密封的小室。
15.
It make use of sealing device for the hopper to prevent dust emission and material leakage. The dust and cross contamination are efficiently controlled.
料桶配置密封装置，锁紧可靠，工作时不扬尘，不泄漏，有效的控制了粉尘和交叉污染。
16.
Fabrication and Properties of β-SiCp/Al Electronic Packaging Material by Pressureless Infiltration;
无压浸渗法制备β-SiCp/Al电子封装材料工艺与性能研究
17.
Design of High-pressure Packing Seal for Pressure Sensor Calibration Device
压力传感器标定装置高压密封垫的设计
18.
Simulation of polyurethane pre-compressing seal deformation process in high-pressure tube-testing press with finite element method
高压水压试管机轴向预压紧密封变形过程有限元仿真