说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 侧向扩挖
1.
Mechanical deformation characteristics of rock mass surrounding lateral enlarging excavation of tunnels with ultra-large sections
超大断面隧道侧向扩挖施工围岩力学特征研究
2.
Design and Improvement of Back Reamer in Directional Drilling Non-excavation Pipe Laying Construction
导向钻进非开挖铺管施工扩回钻头的设计改进
3.
Study on the Effects of Soil Liquefaction Induced Lateral Spreading on Pile Foundation;
土体液化诱发的侧向扩展对桩基的影响研究
4.
Figure 3. Oblique scan of the right iliac fossa showing the zone of transition (arrow) of the dilated to nondilated bowel.
图3右侧髂窝斜向扫描显示扩张和非扩张肠管的过渡区(箭头)。
5.
New Effects: Crossflow, Lateral Dilation,3 D Separation. Governing Equations.
新的效应:交叉流动,侧向扩张,三维分离,统御方程式。
6.
New Effects: Crossflow, Lateral Dilation, 3D Separation. Governing Equations.
32新的效应:交叉流动,侧向扩张,三维分离,统御方程式。
7.
sidepiercing cam actuated die
侧楔作用侧向冲孔模
8.
Slurry pressurized effect on strength and deformation characteristics of clay soil at excavation face in slurry shield
黏性土层中泥水盾构泥浆作用对开挖面土体强度和侧向变形特性影响研究
9.
How to proceed the following procedures of ECCE and insert a posterior chamber intraocular lens successfully?
采取紧急原轮部切口缝合,再向颞侧轮部扩大,作一个新的轮部切口,以继续其后步骤。
10.
It consists of an air-filled protuberance on each side of the pollen grain developed by the separation of the exine layers, giving the pollen a characteristic winged appearance.
它是花粉粒外壁向外扩展而形成的囊状结构,在花粉粒两侧呈翅状,其内充满空气。
11.
Measurement of the lateral strain can be accomplished using a lateral extensometer.
侧向应变可用侧向引伸仪来测量。
12.
Technique for Deep Pit Construction with No-supported Dig
无支护式明挖扩大基础深基坑开挖施工技术
13.
One that excavates, especially a backhoe.
挖掘者,挖土机挖掘的人或装置,尤指反向铲挖土机
14.
1 Roll the person onto one side. Keep the legs straight
将其向侧面,让其侧卧,腿伸直。
15.
To cause(a ship)to lean to one side;tilt.
使船倾侧使(船)斜向一侧;使倾斜,使歪斜
16.
situated at or extending to the side.
位于侧面的或向侧面延伸的。
17.
A tilt, as of a boat, to one side.
倾侧,倾侧度向一边的倾斜,如一条船
18.
However, the bulk of metal in the retreating side is transported backward into the advancing side along the rotation direction.
返回侧金属沿旋转方向流入前进侧。