1.
Research on the Application of DSP on Detecting the Roundess of Wheels;
车轮不圆度检测及DSP的应用研究
2.
A Portable Measuring Device for Circular Profile and Wheel Diameter
便携式轨道车辆车轮不圆度及直径测量装置
3.
Analysis of the Cylindricity Tolerance and Press Mounting Curves of Axle Wheel Seat and Wheel Hub Bore
关于车轴轮座、车轮轮毂孔的圆柱度公差和压装曲线分析
4.
Turning operations are required to make many different cylindrical shapes, such as axes, gear Blanks, pulleys, and threaded shafts.
车削用来切削出不同的圆柱形,如转轴、齿轮毛坯、滑轮、螺纹轴等。
5.
Analysis of Improper Engagement of Zero Degree Arc Bevel Gear
航空发动机零度圆弧锥齿轮啮合不良原因分析
6.
Equivalent ground flatness function for planetary wheel of lunar rover
月球车用行星车轮等效地面不平度函数的研究
7.
The principle straightness error of cutting square in work-pieces can be controlled by choosing a suitable pitch diameter of the planetary gear in the machine tools.
选取适当的车头行星轮的分度圆直径，可以有效地控制车方原理的直线度误差。
8.
a bevel gear that permits rotation of two shafts at different speeds; used on the rear axle of automobiles to allow wheels to rotate at different speeds on curves.
允许不同速度的杆状物旋转的锥齿轮；汽车后部的轮轴允许车轮以不同速度旋转。
9.
Accuracy of cylindrical gear with circular-arc tooth profile
GB/T15753-1995圆弧圆柱齿轮精度
10.
The key to reduce the wheel tyre quality problems is not only to optimize the wheel tyre design,but also to improve purity of steel.
减少车轮轮箍质量问题的关键不仅要优化车轮轮箍设计 ,而且更要提高钢质纯净度。
11.
Show all the locus run by different kinds of wheels. Discover that the round wheels run most smoothly, so they can run fastest.
电脑演示各种形状车论经过的轨迹图，发现圆形车轮是最平稳的所以速度快。
12.
The Evaluation of Measuring Vncertainty of Pitch Accamulated Error for Right-Angle Tooth Columnar Gears
直齿圆柱齿轮周节累积误差的测量及不确定度的评定
13.
Reliability Sensitivity Design of Cylindrical Gear Pairs under the Incomplete Probability Information
具有不完全概率信息的圆柱齿轮传动的可靠性灵敏度设计
14.
A round covering over the hub of the wheel of a motor vehicle.
毂盖机动车轮毂上的圆盖
15.
a rope unwinding from a wheel is wound onto a cylindrical drum or shaft coaxial with the wheel.
击在圆鼓上或车轮的共轴上的直绳。
16.
Solve the problem: Why wheels are all round?
解决车轮为什么是圆形的这一问题。
17.
Dynamics modeling and simulation of a lunar rover with six cylindrical wheels
六圆柱轮式月球车动力学建模与仿真
18.
The Solid Modeling of Disc-type Tool Magazine Based on Cylindrical Index Cam;
基于圆柱分度凸轮圆盘型刀库的实体建模