1.
Stress distribution near the opening and stress concentration for composite laminates with a circular opening
含孔复合材料层合板孔边的应力集中
2.
Approximate Calculation of Stress Distribution Near Hole for Composite Laminates with Finite Width
含孔复合材料层合板孔边应力集中的近似计算
3.
Composite Laminates with Centric Hole in Static Strength;
含孔复合材料层合板的静强度破坏分析研究
4.
Three-Dimensional Finite Element Progressive Failure Analysis of Composite Laminates Containing a Hole Under Axial Extension
含孔复合材料层合板轴向拉伸三维有限元渐进失效分析
5.
Properties of Stitched Composite Laminates-Fatigue Performance of Composite Laminates with an Open-hole
缝合复合材料可用性——含孔层合板的疲劳性能
6.
STUDY ON NATURAL FREQUENCY OF LAMINATES WITH CUTOUT
含孔损伤复合材料层合板固有频率研究
7.
Simulating Calculation of the Effect of Stitching Reinforcement on Composite Laminates with a Circular Hole
孔口缝合补强对含孔复合材料层板应力集中影响的数值模拟
8.
Fatigue Behavior Study of Damaged Composite Laminates
含损伤复合材料层合板疲劳特性研究
9.
The Study on the Stress Concentration Coefficient of the Composite Laminates with a Circle Hole;
带圆孔复合材料层合板应力集中系数的研究
10.
FINITE ELEMENT CALCULATION OF THE STRESS DISTRIBUTION AROUND THE HOLE IN THE COMPOSITE LAMINATES
复合材料层合板孔边应力场的有限元计算
11.
Compression Failure of Composite Laminates with Low-velocity Impact Damage
含低速冲击损伤复合材料层合板的压缩失效
12.
Study on Free Vibration Characteristics for Composite Laminates and Stiffened Plates with Multiple Delaminations;
含多分层复合材料层合板和加筋板的自由振动特性研究
13.
Stress of composite material plate with circular hole was analyzed by the model above.
按照所建立的计算模型对含有圆形孔的复合材料板进行应力分析。
14.
Damage Propagation and Failure Analysis of Damaged Composite Sandwich & Stiffened Plates;
含损伤复合材料夹层板和加筋板的损伤扩展与破坏研究
15.
Dynamic Stability of Composite Laminates and Piezoelectric Smart Laminates Structure with/without Delamination
完善和含损伤复合材料层合板及智能结构的动力稳定性
16.
Nonlinear dynamic stability analysis for piezoelectric composite laminates with debonded interfaces
含界面脱粘压电复合材料层合板的非线性动力稳定性分析
17.
Effect of curing pressure on voids and mechanical properties of carbon fiber reinforced composite laminates
固化压力对炭纤维复合材料层压板的孔隙和力学性能的影响
18.
Research On Optimization Design For Composite Laminated Plates;
复合材料层合板的优化设计方法研究