1.
Effect of steel flow speed in the mould on inclusions distribution in IF steel wide slab
结晶器内钢液流速对IF钢宽板坯表层夹杂物分布的影响
2.
Effect of Billet Withdrawal Speed on Molten Steel Flow and Temperature Distribution in Crystallizer
拉坯速度对结晶器内钢液流动和温度分布的影响
3.
At the same casting speed, the eddy center is the lowest if the pouring angle is about 60° and the penetrating depth of molten steel flow increases with the increasing pouring angle.
在相同的拉坯速度下，随着浇注倾角的增大，钢液流股的穿透深度也随之增大。
4.
The Technique and Equipment of Quick-Speed Circulation Rinsing to Hydrulic Pressure Steel Piping;
液压钢管的快速循环冲洗技术及装置
5.
Research on the Supersonic Two Phase Flow Liquefaction Equipment
超声速气液两相流液化升压装置研究
6.
A Simple and Fast Determination of NO_3~- in Steel Parts Acid Cleaning Solution and Phosphating Solution
钢材酸洗液和磷化液中硝酸根的简易、快速测定
7.
In bottom pouring, the molten steel is poured into a central trumpet, from where it flows through runners to the bottom of a number of ingot moulds.
下注法是把钢液浇人中心注管，钢液从中心注管通过流钢槽流到若干个钢锭模底。
8.
Mathematical model of molten steel circulation in ladle with Ar blast
钢包吹氩时钢液循环流动过程数学模型研究
9.
Numerical simulation on steel fluid field and surface fluctuation in mold for slab casting
板坯结晶器内钢液流动及液面波动的数值模拟
10.
Numerical simulation of liquid steel flowing in RH refining process and its application
RH精炼过程钢液流动数值模拟和应用
11.
Do not overheat cylinder to increase pressure or discharge rate.
禁止使钢瓶过热来增加压力或流速。
12.
Application of AC Fan Motor Speed Regulating Technique for Energy Saving in Baoshan Iron and Steel Works
交流风机调速节能技术在宝钢的应用
13.
Investigation on supersonic cold flow and liquid jet over struts
支板超声速冷流流场及液体喷流混合特性
14.
Study on Hydraulic Model Simulation of 30 t One-strand Continuous Billet Casting Tundish
30t单流板坯连铸中间包内钢液流动的物理模拟
15.
Numerical Simulation on Molten Steel Flow and Circulation Flow Rate in RH Vacuum Degassing Process
RH精炼过程钢液流动行为与循环流量数值模拟
16.
Design and Research on the Hydraulic Cutting System for High-Speed Steel Bar Cutter;
高速钢筋切断机液压剪切系统的设计与研究
17.
Improve Design and Experimental Research on the Hydraulic System for High-Speed Steel Bar Cutter;
高速钢筋切断机液压系统改进设计与实验研究
18.
Whole Quenching in Solution of Tri-nitrate in Water for Butt Welded High Speed Steel Tap
对焊高速钢丝锥的三硝水溶液整体淬火