1.
EXPERIMENTAL STUDY ON THE PROPERTIES OF REBAR PARALLEL THREAD SLEEVE JOINT
钢筋滚轧直螺纹套筒连接性能试验研究
2.
Application of rib-stripped rolling straight thread connection technology in face-slab rock fill dam
钢筋剥肋滚轧直螺纹连接技术在面板堆石坝中的应用
3.
Application of the Collet Connection Technology for Pell off The Ribs and Rolling Plain Bar in Hot-Rolled Swirl Pool Project of Masteel 2250mm Hot Strip Mill While Against Construction;
钢筋剥肋滚轧直螺纹套筒连接技术在马钢新区热轧旋流池逆作施工中的应用
4.
profile and thread rolling die
滚轧型材与螺纹模具
5.
The Study of the Small Diameter Cold-Roll Twisted Steel's Production Quality Control
小直径冷轧螺纹钢筋的产品质量控制研究
6.
The application of the reinforcing peel rib to roll press straight screw thread sleeve connection technique in bridges
钢筋剥肋滚压直螺纹套筒连接在桥梁中的应用
7.
Initial discussion on application of steel rolling straight thread sleeve connection technology
浅谈钢筋滚压直螺纹套筒连接技术应用
8.
There are lots of advantages by cold extrusion for straight knurlnut in a single process.
直纹滚花螺母采用冷挤压一次成形新工艺，成效显著。
9.
Abstract: There are lots of advantages by cold extrusion for straight knurlnut in a single process.
文摘:直纹滚花螺母采用冷挤压一次成形新工艺，成效显著。
10.
Secondly there is error between thethread roll angles of thread rolling die and drill rod.
滚丝轮螺纹和钻杆螺纹的螺旋角有误差。
11.
Rolling System of External Screw Skew Rolling Model and Numerically Analyze;
外螺纹斜轧机轧制系建模与数值分析
12.
Research on the formation of dimensional chain when thread hob rolls thread by axial intake on doubleroller machine;
双滚柱机床螺纹滚头轴向进给滚压螺纹时形成尺寸链的分析
13.
The Research of the Rule of Helical Involute Spline Cold Rolling;
螺旋渐开线花键冷滚轧成形规律研究
14.
Finite Elements Analysis and Numerical Simulation for Rolling System of External Screw Skew Rolling Mill;
外螺纹斜轧机轧制系有限元分析与数值模拟
15.
The Expert System of Design Rolling Series of Rollers of External Screw Slant Mill Based on the MATLAB;
引入MATLAB的外螺纹轧机轧制系设计专家系统研究
16.
WATER-CROSSING REFORMATION OF TWO-SPLITTING ROLLED REINFORCED BAR OF Φ12mm
二切分Φ12mm螺纹钢轧后穿水改造
17.
Three dimensional FE simulation of ball spinning of inner grooved copper tubes
内螺纹铜管滚珠旋压三维有限元模拟
18.
FE simulation on the ball spinning forming of inner grooved copper pipe
内螺纹铜管滚珠旋压成形有限元模拟