1.
Reduction Pass Rolling in TM Finishing Mill Train of Laiwu Steel's Large H-beam Product Line
莱钢大H型钢生产线TM精轧机组减道次轧制
2.
The results show that the bonding is good when the temperature, two passes deformation ratio of rolling are1250℃,50% respec tively.
结果表明：轧制温度为1250℃两道次的轧制变形率为50％，界面结合较好。
3.
FEM Simulation and Optimization of Six Pass Cool Continuous Rolling Process of Wire and Bar Stainless Steel;
不锈钢线棒材六道次冷连轧轧制过程有限元仿真与优化
4.
Effect of dysprosium on shape of β phase,homogenization treatment time and maximum reduction per rolling pass of AZ31 alloy
镝对AZ31合金β相形状、均质化处理时间及单道次最大轧制率的影响
5.
Suppression of multiples by improved expanding multi-channel match minus method.
利用改进的扩展多道匹配相减法压制多次波
6.
Investigation on Magnesium Alloy Sheet Manufactured by Strip Casting and Downstream Rolling;
铸轧—二次轧制法制备镁合金薄板的研究
7.
FEM simulation of hot rolling process in the second pass considering dynamic recrystallization in the first pass
考虑一道次动态再结晶的二道次热轧仿真
8.
The Downstream Rolling Process of Twin Roll Casting Magnesium Alloy Sheet AZ31B;
双辊铸轧AZ31B镁合金板坯的二次轧制工艺
9.
Study on Semi Steel Precision Roll after Crude Roll Pass and Second Heating Treatment
粗开孔型二次热处理精轧半钢轧辊的研制
10.
FEM Simulation of Second Hot Rolling Considering Microstructure Evolution during First Pass and Time Interval
考虑一道次及道次间隔期间组织演变的二道次热轧仿真研究
11.
Drive Control System of WRB and FRS for New High Speed Roll Mill in Xianggang
湘钢新高线精轧和减定径机组传动控制系统
12.
Simulation of Mutli-Pass Hot Rolling Plate by a Mixed Analytic -Numerical Method;
中厚板多道次热轧过程的复合解析数值法模拟
13.
Finite Element Simulation of Multi-Pass Reversing Hot Rolling for High Temperature Alloy
高温合金钢板多道次可逆热轧的有限元模拟
14.
FE simulation of multi-pass reversible hot rolling of GH4169 alloy plate
高温合金GH4169多道次可逆热轧的有限元模拟
15.
Continuous Finite Element Simulation of Plate Multi-pass Hot Rolling
中厚板多道次热轧过程有限元连续模拟
16.
In virtue of off-line simulation and calculation, not only the ability of accommodating water in each pass can be designed but also the relationship between quantity of water and finished temperature can be known.
通过离线模拟可以设计精轧道次的供水能力,同时了解冷却水量对终轧温度的影响。
17.
Application Research on Optimized Wire Rod RSM Rolling Parameters by DOE
运用试验设计优化高线减定径机组轧制参数的应用研究
18.
Application Research for Oil Film Thickness Compensation Control of Cold Tandem Mill;
冷连轧机厚控系统加减速油膜厚度补偿控制的研究