1.
RESEARCH ON WELDING PROCEDURES AND FATIGUE PERFORMANCES OF OVERHEAD FILLET WELDS OF STEEL BOX GIRDERS FOR SUTONG BRIDGE
苏通大桥钢箱梁仰角焊缝焊接工艺及疲劳性能研究
2.
The box corner welds were made with E70 electrodes.
箱型梁内角部焊缝所用的电焊条为E70。
3.
Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger
换热器管-管板角焊缝焊接质量的控制
4.
Study of Length Calculation of Three Side Welded Lap;
三面围焊搭接角焊缝长度计算的探讨
5.
Parameters optimization of fillet weld sealing joint in high pressure hydrogenation heat exchange
加氢换热器角焊缝密封接头焊接工艺参数优化
6.
Application of ultrasonic sensor in automatical welding of right-angle welding seam
超声波传感器在直角焊缝自动焊接中的应用
7.
Analysis on welder's operating methods influencing quality of fillet weld of stainless sheet plate
焊工操作手法对不锈钢薄板角焊缝质量的影响
8.
Effect of Outside Welding Groove Angle on Weld Quality of X80 Grade SSAW Pipe
外焊坡口角度对X80级螺旋埋弧焊管焊缝质量的影响
9.
A Research into the Basic Formulation of the Calculation of the Welded Seam Strength of Right-Angle Welded Seam;
关于直角角焊缝强度计算基本公式的探讨
10.
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
11.
Security assessment of over roundness circumferential weld of the pressure vessel
压力容器环向焊缝棱角度超标的安全评定
12.
Inspecting the Storage Tank's Bottom Plate Fillet Welds by PT
渗透检测在大型储罐底板角焊缝检测中的应用
13.
Fillet Welding Seam Tracking Based on a Mobile Robot with Rotational Arc Sensor
以旋转电弧为传感器的移动机器人角焊缝跟踪
14.
AN APPROACH TO MAGNETIC PARTICLE DETECTION TECHNOLOGY USED FOR ANGLE WELD JOINT ON SMALL SIZE TUBE SOCKET BASED ON YOKE MAGNETIZATION METHOD
小尺寸管座角焊缝磁轭法磁粉检测工艺探讨
15.
Fillet Weld Tracking System Based on PLC and Optical Sensor
基于PLC和光学传感器的角焊缝跟踪系统
16.
Experiment on tensile and shear strength of front fillet welded joint post-high-temperatures
高温后正面角焊缝抗拉剪切强度的试验
17.
Ripple line fillet seams tracking control of a mobile robot for container welding
移动机器人波纹板折线角焊缝跟踪控制
18.
Application of Angle Gauge on Elliptical RT for Small Diameter Welding Tubes
角度指示计在小径管焊缝椭圆透照中的应用